Anycubic Photon Printer Owners 造訪社團 » mac

原文網址 Nathaniel Johansson
2019-08-02 03:57:31

I have a problem... ?
My girlfriend tripped on my photon powercable and ruined the print.

After that I reconnected it, aligned it and started a new print, but after a few minutes or what I would guess around 15-20 layers the machine went black and the light on the power brick is out. Which makes me assume it has no power.

I have verified that the power outlet is working and tried the cable between the power brick and the wall outlet on another machine (which worked, so that part isn’t broken).

Any tips? Is my power brick dead and if so where to find a replacement? Or do you have any other tips on what to check?

翻譯年糕

Jeff Johnson
2019-08-02 04:05:30

Trevor McIntosh
2019-08-02 04:05:36

Trevor McIntosh
2019-08-02 04:05:42

Greg Kourakos
2019-08-02 04:08:28

Nathaniel Johansson
2019-08-02 04:10:52

Jeff Johnson
2019-08-02 04:13:08

Nathaniel Johansson
2019-08-02 04:13:26

Trevor McIntosh
2019-08-02 04:20:14

Trevor McIntosh
2019-08-02 04:21:30

Trevor McIntosh
2019-08-02 04:22:45

Melecio Guzman
2019-08-02 04:27:22

Nathaniel Johansson
2019-08-02 04:42:22

Tony Healey
2019-08-02 04:42:34

Nathaniel Johansson
2019-08-02 04:45:14

Joel Mendoza
2019-08-02 05:35:26

Rick Gonzales
2019-08-02 05:52:34

Nick Eason
2019-08-02 06:11:10

Justin Cupitt
2019-08-02 06:52:17

Stephen Brian Palmore
2019-08-02 09:40:12

Spike Walker
2019-08-02 15:38:28

Andy Tellier
2019-08-02 20:46:35

Sébastien Blais
2019-08-02 22:05:32

Ben Messer
2019-08-02 23:54:36


原文網址 Miguel Zavala
2019-08-01 21:23:56

Hello friends! I proudly present to you a gallery of all the Letter D creatures from "Mordenkainen's Tome of Foes" that I 3D modeled and printed. As usual, all the files are free and under each image.

https://imgur.com/gallery/guc3VBg

The majority of these were printed with the Photon, so it just shows how amazing this little machine really is! These creatures were a real modeling and printing challenge, and I'm pretty proud of my paint jobs too :-) .

Reddit post here: https://bit.ly/2T7ucdX

Time to move on to the Elder Elementals! I hope you like my works everyone!

翻譯年糕

Lim Kim Yong
2019-08-01 21:34:10

Miguel Zavala
2019-08-01 21:42:27

Shawn Daugherty
2019-08-01 21:45:31

Sergio Rosas
2019-08-01 21:48:06

Chad Elstad
2019-08-01 21:49:46

Miguel Zavala
2019-08-01 21:51:51

Miguel Zavala
2019-08-01 21:51:58

Miguel Zavala
2019-08-01 21:52:01

Lim Kim Yong
2019-08-01 21:52:57

Justin Nelson
2019-08-01 21:55:16

Miguel Zavala
2019-08-01 21:56:40

Miguel Zavala
2019-08-01 21:57:00

Lim Kim Yong
2019-08-01 21:57:07

Vinay Shah
2019-08-01 22:42:34

Miguel Zavala
2019-08-01 22:42:59

Carlo Aemos Residori
2019-08-01 23:29:02

Miguel Zavala
2019-08-01 23:29:30

Julio César López Moreno
2019-08-01 23:54:40

Miguel Zavala
2019-08-02 00:00:01

Michael Fairley
2019-08-02 00:18:09

Miguel Zavala
2019-08-02 00:18:48

Joshua Alexander Gilpin
2019-08-02 00:56:13

Michael Fairley
2019-08-02 02:08:28

Miguel Zavala
2019-08-02 02:13:46

Miguel Zavala
2019-08-02 02:14:47

Dave Wilson
2019-08-02 03:13:17

Miguel Zavala
2019-08-02 03:15:44

Aaron Marino-Drake
2019-08-02 06:21:18

Miguel Zavala
2019-08-02 06:46:35

Hugh Jeriolas
2019-08-02 07:57:15


原文網址 Mike Allen Jr.
2019-08-01 09:17:58

A better look at the minis I printed. Loving this machine!

翻譯年糕

Matthew Lee Lewis
2019-08-04 11:18:57

Mike Allen Jr.
2019-08-04 11:20:48


原文網址 Mike Fatchett
2019-08-01 00:05:32

I thought Anycubic support was supposed to be decent. I submitted a ticket over the weekend and got an email back saying they got the ticket. Nothing since.

My problem is that the printer would just print a layer or two and reboot. I hooked the printer up to a UPS and have been unplugging the printer and waiting a few minutes before printing again. This seems to have worked.

I have noticed that the machine will not read my usb sticks they are 16gb fat32 formatted that work in everything else. The usb port on the photon seems really sloppy. It makes me wonder if there is a problem in the usb port that if the table is bumped or something that the usb stick is no longer making a good connection and faulting out?

Does anyone know how to contact AnyCubic to get reliable help?

翻譯年糕

Dave Smith
2019-08-01 00:09:52

Mike Fatchett
2019-08-01 00:11:15

Mike Fatchett
2019-08-01 00:11:21

Mike Fatchett
2019-08-01 00:12:18

Spike Walker
2019-08-01 01:53:13

Mike Fatchett
2019-08-01 01:55:22

Spike Walker
2019-08-01 02:13:06

Mike Fatchett
2019-08-01 06:05:19

Ced Ric
2019-08-01 15:56:34


原文網址 Thor Polukoshko
2019-07-31 10:57:37

What kind of USB sticks is everyone using? Right now, the only stick my Photon even recognizes is the one that came with the printer (and I'm aware that there are problems with it). I've tried four other sticks that I have at home. A couple of them are small drives (8 and 16 GB), which I've heard work better. Nothing works.

I got this machine a week ago and haven't used it much yet. Right now, I'm stuck using the stock USB drive, and I'm pretty sure that's why my machine keeps failing within the first 4 layers (memory errors and random rebooting). I got one good print out of it a couple days ago, but today I have had about six 1-4 layer fails in a row, and I'm getting frustrated...

Any help would be appreciated!

翻譯年糕

Jay Kay
2019-07-31 11:04:31

Gaetano Caico
2019-07-31 11:08:17

Thor Polukoshko
2019-07-31 11:09:27

Thor Polukoshko
2019-07-31 11:10:08

Nick Eason
2019-07-31 11:10:51

Jay Kay
2019-07-31 11:11:11

Michael Drew
2019-07-31 11:53:10

Jon Carroll
2019-07-31 11:58:24

Peter Ede
2019-07-31 12:14:36

Jeff Johnson
2019-07-31 12:16:35

Wiggins Caleb K
2019-07-31 12:32:50

阮天青
2019-07-31 12:35:48

Thor Polukoshko
2019-07-31 12:41:21

Thor Polukoshko
2019-07-31 12:41:55

Weng Fai Yeap
2019-07-31 12:44:22

Marco Dieckhoff
2019-07-31 12:49:38

Eric Jorgensen
2019-07-31 12:49:55

Justin Cupitt
2019-07-31 13:43:30

Conor Tanji
2019-07-31 14:28:37

Kempster Kevin
2019-07-31 14:48:40

Michael S Dooley
2019-07-31 14:49:09

Rafal Dowejko
2019-07-31 16:05:21

Abdul Hanan Ismail
2019-07-31 17:11:27

Andrew Parish
2019-07-31 20:09:29

Scott Pavlich
2019-07-31 20:13:19

James O'Keane
2019-07-31 20:40:11

Luke Manser
2019-07-31 20:51:18

Craig Underhill
2019-07-31 21:53:49

Chris Edrington
2019-07-31 22:28:53

Clint B. Kauffman
2019-07-31 23:07:29

Don Bullock
2019-07-31 23:19:54

Sonny Green
2019-08-01 00:25:18

Mark Blocksdorf
2019-08-01 00:55:44

Troy Wood
2019-08-01 03:31:21

Thor Polukoshko
2019-08-01 07:13:52

Liam Warner
2019-08-02 07:23:12

Don Price
2019-08-04 06:32:20


原文網址 Lorenzo Di Sante
2019-07-31 07:17:17

Hey guys, lately I've been using Chitubox instead of Photon Workshop to slice my prints.

But I was wondering, why in Chitubox I've so many settings for the Photon as Lifting distance and anti aliasing, while this settings aren't available for the Photon S? (they are almost the same machine)

p.s. another question, the AA works on the Photon S ( I bought it few weeks ago) or it needs firmware update?

翻譯年糕

Sean Croteau
2019-07-31 07:31:31

Lorenzo Di Sante
2019-07-31 07:33:08

Sean Croteau
2019-07-31 07:37:37

Lorenzo Di Sante
2019-07-31 07:38:20

Chris Graf
2019-07-31 07:59:43

Lorenzo Di Sante
2019-07-31 08:02:22

Stefan Giudici
2019-07-31 08:18:01

Lorenzo Di Sante
2019-07-31 08:20:12

Gary Houser
2019-07-31 08:56:04

Stefan Giudici
2019-07-31 10:16:51


原文網址 Stephen Aguilar
2019-07-31 00:44:32

After a back and forth with tech support they think my issue is a UV lamp malfunction. They want to send me a new lamp, but I’m still within the 15 day replacement survey window.

Should I go with the lamp replacement or just opt to get another machine?

Thanks for the help so far, this group has been super helpful.

翻譯年糕

Sean Croteau
2019-07-31 00:48:32


原文網址 Ben Cox
2019-07-30 05:17:38

So, typically I'm the one offering solutions, but I've been having a helluva time with my prints lately. I've noticed that the print bed angles up when it is at the bottom (like when I start a print, and it goes to full travel down, it hits the bottom and looks like it pushes the front of the bed up). Anyone have this problem? Nothing else is wrong, no broken LCD, the FEP is likely due for a replacement soon, but nothing major(any tips on the proper app for tuning the FEP?) Since a few prints ago, I've had at least one failure per print (something falling off supports, weird lines at the bottom of the figure, all sorts of stuff). I'm hesitant to take the machine apart, but it feels like I will need to to get to the bottom of this. I used to be a heavy aircraft mechanic, and I just know that if I do take it apart, I'll end up breaking something important getting it all together again.

翻譯年糕

Will Koehler
2019-07-30 05:27:54

Ben Cox
2019-07-30 05:28:49

Will Koehler
2019-07-30 05:29:57

Will Koehler
2019-07-30 05:30:54

Will Koehler
2019-07-30 05:32:18

Will Koehler
2019-07-30 05:32:44

Will Koehler
2019-07-30 05:32:56

Todd Jones
2019-07-30 06:27:21

Ben Cox
2019-07-30 06:47:27

Ben Cox
2019-07-30 06:50:09

Michael S Dooley
2019-07-30 12:53:22

Johannes Weis
2019-07-30 15:31:06

Ben Cox
2019-07-30 16:14:45

Michael S Dooley
2019-07-30 22:01:53


原文網址 Iñigo Sordo
2019-07-30 03:57:35

This went quite perfect. No supports with elegoo grey at 0.05 and 9 secs. Could de detail be improved. The finer detail such as the shirt fabric texture is almost gone. I dont know if the photon can be pushed a bit more. Although quite happy. Awesome machine

翻譯年糕

Steve Marshall
2019-07-30 04:24:27

Iñigo Sordo
2019-07-30 05:15:00

Stfn Aqua
2019-07-30 06:09:14

Iñigo Sordo
2019-07-30 07:34:23

Clifford Schwankner
2019-07-30 08:21:57

Iñigo Sordo
2019-07-30 08:27:12

Clifford Schwankner
2019-07-30 08:38:24

Stfn Aqua
2019-07-30 14:46:03

William Preston Welch
2019-08-01 23:53:37

Clifford Schwankner
2019-08-02 00:19:34


原文網址 Rafal Dowejko
2019-07-30 03:50:47

Hi, so jow low can i go with my photon, i have the green resin, can i go 0.02? Or 0.015? And if so what exposure times should i use, Im a complete newb just got the machine today

翻譯年糕

Chad Elstad
2019-07-30 04:04:46

Michael S Dooley
2019-07-30 04:24:07

Rafal Dowejko
2019-07-30 04:28:39

Michael S Dooley
2019-07-30 05:13:43

Nicholas Taylor
2019-07-30 06:25:12

Ced Ric
2019-07-30 14:45:33

Rafal Dowejko
2019-07-30 14:56:36

Michael S Dooley
2019-07-30 22:04:04

Michael S Dooley
2019-07-30 22:07:18

Nicholas Taylor
2019-07-30 22:58:14


 

全不選 發文排行