Anycubic Photon Printer Owners 造訪社團 » 3D

4 hours?! You may be underexposing that a lot.

Yessik Ziiq no. This resin works for it. I didn't support the feathers

salvageable. place a piece of tape on the back wing and put a thin layer of resin down to fill the gap. harden under UV. Wont be perfect but at least it will have personality.

Herman Simpson omg you're right!!! I'm clear coating it after

Oksana Shevchenko What resin are you using, that seems so low, even translucent resins I find take 6-10 seconds.

That looks good to me, looking at the model in the link it seems like the wings are thin.

cut the wings off and u got a fine horse!

glad to help!

Kraken song?

Miky Corleon hahahhaha yes. Just finished watching dead man's chest

ToAuto. It's at 6 seconds :) I dropped the up down motion to 2 mm

Hoghead Hoffer hahahahaha it's for a friend

Tucker Harris super thin and I had to shrink it a bit

Oksana Shevchenko Ok that's a bit better, Does 2mm do the trick? I always just assumed there was a reason for the larger pull up distance.

Oksana Shevchenko they look thin even on the page. Maybe try increasing your exposure time a little bit.

Yessik Ziiq well. That's what I'm experimenting with. This resin is really runny. So it doesn't need at much time to fill back in underneath?

Interesting. I also defaulted high to 4.5mm I think. Is this resin you're using more liquid-y or viscous?

Don’t look a gift horse in the mouth.

Hoghead Hoffer Just like my mother used to say.

little bit of greenstuff and UR sorted

thats depressing

so i paint miniatures as context, first thing it looks like your using citadel contrast, you need a primer for them, i suggest going with army painter or ak interactive (best one is their airbrush primer, grab an iwata neo gravity feed airbrush from ho bby lobby and an air brush compressor from harbour freight) get a white base coat as thats what it is desgined for. for her blue zero suit i would prime that part black then do a paint called stormhost silver, a super bright silver. take either calth blue candy or talssar blue and apply that thinned out in layers, until the right look is achieved. an airbrush helps a lot with this. for her outer armor i would do another layer of stormhost silver and then try an orange contrast paint. her blaster would just leave gunmetal. and add some detailing in the recesses with clath blue. her hair i would prime white then do wither seraphim sepia or a yellow contrast paint with highlights. her skin is tricky. for a kinda fair skin i would do a thinned out layer of reikland fleshshade and highlight with a fair skin tone like pallid wytch flesh

An air brush isn’t necessary, although I love mine.

Are all of you paints contrast? If you have normal paint, and all of the primary colors (Red, Yellow, Blue) as well as a black and white for brightness, then you can get any color you want with mixin g. Then you can finish the model without needing to break isolation.

You could probably mix contrast paint too, but I’m not very experienced with it. I have two pots of it, but it was just because I wanted to try it.

Look up a color wheel with help mixing paints. A quick tip, gradually add new colors. Mixing too many pigments will quickly become brown.

I have all the contrast paints and they mix very well! I'll even water down and add normal dropper paint if I need to.

Pretty much. I have basic wraithbone paint and brown paint but everything else is contrast

Also thank you for the , input!

I'll check it out! I'm still using the anycubic slicer but I've heard great things about chitubox!

Hi
Which stl is it I want to make one for my oldest

Keith Douglas Ahlstrom https://www.thingiverse.com/thing:4038181

Please please please tilt it. The very bottom of the base is uneven and my first attempt failed because of that

I made this for my mom, your's looks great! I wish I had thought of doing that thing with the eyes.

Thanks

Mika Gruszka thanks

William Tatum I used a white gel pen for the shines on the eyes. XD it's my go to for adding shinies and it turns out it works on craft paint

from the vanhelsing movie?

Sean Croteau Constantine

Sean Croteau Like Shawn Barnes said, Constantine with Keanu Reeves.

I saw them around the same time, so the specifics are fuzzy for me.

JOHN Constantine!

Dieter Bürgy

Don't know why, but first picture at a glance I thought it was some kind of empire space cathedral ship from battlefleet gothic.

Ernest Sandridge Ill Haha on a black background maybe.

love it...is the stl public???

This is AMAZING.

Such an underrated film

Kevin Lau Ye it really is.

Natasha Kerensky No sorry its on my Patreon.

looks like the angel gun from constantine?

where'd u get the model? i have the original file from the film. buddy of mine who worked on the film sent it to me in trade for pazuzu's 3d print file from the tv show i worked on.

NICE PRINT btw.

Adil Muschelewicz It is and its my model. Your talking about the stunt version though arent you?

John Colt Hendricks Thanks dude.

Daniel Lilygreen Its the print file not sure I never had time to print one. It’s on an old HD’s somewhere. He said was modeled In solid works or some shit. And they had him
3D print it. Dudes like 10 years older than me. So when I worked on Constantine he reached out. I wanna say. He does the 3D printing now for Batnthesun. And we’re working on some red hood pilot now.

I’m the Adil from the 3D print. Com article. Lmk if you want any of those. I kept the rights to every one we did for the show. Might as well print an icon of pazuzu

ahh cool dude would be great to see how close it is to my attempt at it. Awesome that sounds so cool.

Daniel Lilygreen it’s spot fucking on if not better

Daniel Lilygreen make sure to add me and dm me. I’ll send homeboy the screenshot. He’ll love to see that.

Adil Muschelewicz haha thanks dude, I used every picture I could get my hands on and used a lot of pictures of the stunt version that was up ffor sale on the Prop Store some time ago. Ye dude will do.

Daniel Lilygreen welcome to the family

Why not first find the right settings for 1 model and then add more to the plate ? saves you a lot of resin ?

Kevin Lems do far the photon classic has no real way to dial up the resolution. I should have printed it on the S. And I print in bulk because I sell kits. So I need to take that chance. It's worth it in the end. I have 8 resin and 2 filiment printers that run 24/7 365. This stuff happens! But I print at least 100 things a week.
It's part of the process.....I call it success from failures!

Robert Small haha my bad ? tought it was a first time failure ? but in your case I can understand it's worth taking the risk ? what kind of kits do you sell of I may ask? ?

Kevin Lems I'm in the process of designing kits out of early manned space race this was a never realized x20 Dyna-Soar that Boeing had proposed and was to be our first space vehicle before the Mercury space capsule but once Russia launched Gagarin into space we dropped the project for mercury

Looks amazing! ? must be a really fun project to work on ?? did you design the models and parts yourself?

Yes I have been in 3D graphics since 1988.

Damn! You must have a ton of experience! Can I borrow some? ? ? I've just started using Blender and Forger (ipad) for making sculpts and models. Wich programs do you use?

I've used almost every program out there without exaggerating but I can tell you the newest version of Blender is more capable then anyone under designing nuclear reactors could need!
As a matter of fact the new version I notice is starting to mimic al l of the other 3D programs combined. Since it's an open source software hundreds of thousands of us have been making suggestions because we have been using blender and everybody else's program. So you can imagine I highly recommend blender for two reasons it's easy to use and a comprable program costs nothing under than $1,500 a year just to use.
So let that sink in a comprable program to Blender say 3D Studio Max charges you $1,500 a year it is not a one-time cost.

Nice! Thanks for the info ?? gonna stick with Blender ?? it has a lot of functions but there are also a lot of tutorials to follow. So I will keep working with it ?

Kevin Lems let me know if you need help.
I'll point you to instruct if I can.

Look into DAZ if you want humans and animals. The models merge with Blender. And it's a free one also.

Robert Small I'll definitely let you know ?? thanks!

Not sure what you mean? The photon and the s are both capable of the same resolution: looks like your exposure is a problem

Scott Pavlich no...no...my slicers say different. There are no resolution settings to effect the resolution. Even in Chitubox that feature drops off the the classic setting so your ony at the #4 setting as resolution. I print things with very fine detail twenty-four hours a day 365 days a year and I print over a hundred parts a week.

Disagree: you can only print so well with a 2K resolution screen. I can pull equally as well with both my S’s and my reg photons regardless of the slicer

Scott Pavlich cool

Robert Small please explain as i am keen to understand if there is a real difference between the machines or clippers. do you use chitubox for both?

Jim Monty no it's really a few things like how old the screen is. Because I print so much it's most likely that the screen is becoming what turns out to be out of focus. So the slicers settings are no help. I have changed 15 screens in 2 years. And u n otice as time goes buy one if the signs your gear is at the end of life in that screen is what's in this shot.
Plus in 3d (I've been using 3D software since 1988) you're looking at what's called a point cloud and it is what its name defines your 3D model is merely a cloud of points at any time from the transference changing it from one program to the next information can be dropped that while you see the full image on the screen the information may not transfer during the time of the slice.
I've only been doing this for the last 5 years so a tiny bit of what I'm saying is speculation.
But I have to classics two s's and 3 Elegoo Mars printers and even from printer to printer there are minut changes that's so far aren't predictable.

Which has produced the finest detail of your three types?

Jim Monty I think so far the S and the Elegoo are neck and neck. The difference is the cost in screens and noise volume. The S is more the twice the cost of the screen of the Elegoo but.... The Elegoo is real loud! The Anycubic is more restrictive when it comes to access to the interior and the Elegoo is the simplest to level. It's like any tool. You learn in time how you can make the printer do what you want.

Tip time. With a 3D object because the skin changes in dimension of the object simply rotating it in a different orientation in the slicer can sometimes clean up the model.
So by simply going into the slicer in rotating the model into directions you might not think you would want to use or it might be a problem to clean up is sometimes what saves the project.

All of these 5.5" printers have the exact same screen. Some just have different connector ribbons but the screen itself is the same.

Nipuna Gunarathne Thank you.

possible to get the stl? love it! great work!

Marco Schmitz Thank you, I'm glad that you liked the work! Unfortunately I do not give stl, it is important for me to preserve the uniqueness of the work.

How much to make a custom design for me ?

That is some great work!

Beatiful work! I've been following your posts and thanks for tips :)

Another great job.... Congrats!!

Omg this is the cutest thingbive ever seen

Amazing work!

I'd like to know more about the process of creation of the eyes :o how did you do them?
They are WONDERFUL!

WOW! This is totally amazing work! Be proud of this! ?? ?? ?? ?

❤️ ❤️ ❤️

Gold Walker , Do you mean 3D model, or complete creature?

Dmitry K Valberg Thanks!

Rastko Stanojevic thank you very much, I appreciate that!!

Luis de la Peña Thank you!!

Sargent Raze Thanks :)

Michael Fieweger Thanks! I always try my best! :)

Francesco Ostili Oh, they're made from 2 separate parts. Clear hemisphere and iris part. and then they're glued with clear resin.

Ingemar Rååd Thank you very much!

Vera Ermakova but are they 3D printed? :O

Francesco Ostili Yeah, they are :)

How did you create that effect (the iris) with the resin?
Did you mesh differet colour?

I heard you were going to release a tutorial. am I wrong?

Francesco Ostili Iris - is separate part, which I paint manually, before glue it with hemisphere.

I told that I could make a tutorial someday, but currently I have no time for that...

Awesome work!!!!!
You are amazing!!

Pedro Torres Thank you so much!!

Vera Ermakova yes

From Russia with love, amazing colour and detail. You are truly gifted artist. ??

That still looks like some amazing detail though. Good job!

Mind blown

I'm over here printing decent goblins and feeling good about myself. You are making works of art!

Not sure what it is but it is awesome.

Congrats .. Breathtaking ;)

Michael Inwood thank you :)

Ernest Sandridge Ill , Thank you!!!

Chad Weber , Thanks!!

Josh Tollison , thank you! I am really trying to make the art :)

Marcin Brodowski , thank you very very much!!

Gold Walker Sooo... Yes - what you mean exactly? :)

Vera Ermakova I mean to create the STL file I can print myself sorry

Gold Walker Well , that depends of many things :) So you can message me to clarify things.

Vera Ermakova I have sent PM

Why is it whenever I feel like I'm below avg at something. Stuff like this really makes me realize how far into the ground I am at stuff lol this is just beautiful in every possible aspect!

It is awesome, but if it's the first 3d thing they sculpted and they did it with mudbox, the first 3d program they used, how did they know that it has less features than z-brush?

Потрясающая работа, завораживающе красиво. Изумительная идея и исполнение. Спасибо!

Beautiful work (y)

Dave Dewees , Thanks! I shared this work now, but it doesn't mean this is the last work ;) I've been using ZBrush for half of a year now :)

Hutch Heberer , Thank you very much!

Sol Aris Огромное спасибо! :)

Been out since January ;-)

Been in isolation since January?

i just realised i had 2 versions installed been usng an old version icon on desktop different install to the one i called up on search bar ,. sigh.

Check and make sure you the same exact settings on each version of chitu

Well I think I found the problem! Resin leaked all over my screen. Soaked in denatured alcohol for a few minutes then took a razor scraper to it carefully.
Fep didn't show signs of leaking through a water test but I'm not taking chances. Replaced It.

I had similar this week. Prints started sticking suddenly and found resin had creeped under. Cleaned it all and retried but had the same issue.

Got new FEP, tried that and resolved it straight away.

Ya my prints came out a ton better. Print failed today. Gonna post about it. Supported elbow didn't print propperly