• 3D列印服務
  • #maker+t=market
  • COSPLAY 3D 建模
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » resin

原文網址 Stefan Olsson
2020-01-31 04:41:00

I have asked Anycubic several times why they don´t announce the new eco resin in ordinary colors such as white, black and grey but the always answer "soon". Anyone in this group know anything?

翻譯年糕

Karoten Buford
2020-01-31 04:43:04

Charles Lease
2020-01-31 04:43:56

Jarrod Smith
2020-01-31 04:46:04

Stefan Olsson
2020-01-31 04:53:36

Jarrod Smith
2020-01-31 05:02:19

Robb Nunya
2020-01-31 05:03:03

Yashar Yucel
2020-01-31 14:16:10


原文網址 Mark Parnell
2020-01-31 04:12:08

Quick question..Why does a Photon mess up prints when you change Resin,I went from one bottle of Grey to another(same brand) and all i've had is failed prints.The main issue is prints not sticking to the build plate.

Things i've done are as follows

Shook the resin

Cleaned and leveled Build plate(paper and Reed method)..Multiple times

Cleaned Vat

Upped Exposure times

Lowered exposure times

Bought a new build plate(same results)

Swore a lot

threatened the machine with violence

Tried a black resin

I've had some parts stuck to the vat,then had parts that stay on the build plate but were warped.

I have noticed that when i level with paper that i have less tension on one side(yes i've loosened the grub screw and flattened the build plate)

I've had a month of real good printing,so i'm getting pissed off now,any help would be cool

Sorry cos a quick question became a essay.

If pics are needed i can upload some tomorrow

Thanks Guys

翻譯年糕

Richard Shapiro
2020-01-31 04:24:35

Joe Kirkus
2020-01-31 04:27:45

Joe Kirkus
2020-01-31 04:28:01

Mark Parnell
2020-01-31 04:28:22

Mark Parnell
2020-01-31 04:29:03

Joe Kirkus
2020-01-31 04:30:03

Mark Parnell
2020-01-31 04:30:30

Mark Parnell
2020-01-31 04:30:59

Evan Miller
2020-01-31 04:32:01

Richard Shapiro
2020-01-31 04:32:22

Mark Parnell
2020-01-31 04:33:15

Joe Kirkus
2020-01-31 04:34:15

Mark Parnell
2020-01-31 04:34:31

Mark Parnell
2020-01-31 04:35:41


原文網址 Dombi Szilárd
2020-01-31 03:54:19

Do you know the difference between these Elegoo white resins? The third is water washable ok, but what is the difference between the first two?

翻譯年糕

Allison Janssens
2020-01-31 03:56:05

Sokha Ang
2020-01-31 03:56:30

Joel Mendoza
2020-01-31 04:01:20

Dombi Szilárd
2020-01-31 04:02:42

Dombi Szilárd
2020-01-31 04:03:45

Dombi Szilárd
2020-01-31 04:05:56

Dombi Szilárd
2020-01-31 05:25:30


原文網址 Jarrod Smith
2020-01-31 03:45:42

Does anybody have a substitute (or source) for the OG Anycubic translucent yellow resin? It used to be widely available in the US but now all I can find is the plant-based one which is not translucent. I use a fair bit of this resin and need to find an affordable source, or a reasonable alternative that looks and behaves similarly.

翻譯年糕

Nick Williams
2020-01-31 03:47:21

Jarrod Smith
2020-01-31 03:47:37

Nick Williams
2020-01-31 03:55:34

Jarrod Smith
2020-01-31 03:57:21

Nick Williams
2020-01-31 04:05:47

Jarrod Smith
2020-01-31 04:26:44

Nipuna Gunarathne
2020-01-31 15:36:58

Jarrod Smith
2020-01-31 23:51:32

Jarrod Smith
2020-01-31 23:53:38

Mark Wardle
2020-02-01 00:15:20

Mark Wardle
2020-02-01 03:09:05

Jarrod Smith
2020-02-01 04:24:28


原文網址 Shawn McDonald
2020-01-31 03:31:56

Anybody ever use this for resin tests?

This is just a straight, sliced ".photon" file print, right? There's no PrintTest.gcode involved, right?

https://www.thingiverse.com/thing:165389/comments 翻譯年糕

Podok T. Mad
2020-01-31 03:40:54

Sean Latto
2020-01-31 03:48:04

Jacob Palmer
2020-01-31 09:29:48

Jose Alfonso Ortiz
2020-01-31 11:17:09

Shawn McDonald
2020-01-31 11:18:46

William Riker
2020-01-31 21:46:34

Philippe Maegerman
2020-02-01 00:17:47


原文網址 Jamie Masotti
2020-01-31 03:20:10

So I did some resin color mixing experiments to make a purple and thought maybe some people here would be interested in the results!

Picture from right to left:
-transparent blue and transparent red elegoo resin mixed evenly together. This somehow turned clear and glows in the dark?? Lol

-The red and blue resin mix with medusa coliro pearlescent pigment. It didnt want to mix and just stayed in chunks inside the resin.

-I added purple citadel contrast colors acrylic paint to the mixture, again it didnt mix well and you could see lots of chunks in the resin.

-I added white anycubic resin here to make it more opaque, still very chunky but still printed well.

-in then next photo, this was printed with the resin mixture after it was left in the vat overnight. It seems to have all dissolved and mixed together in that time and made a very nice consistant and opaque smokey purple with no chunks! :)

There ends my experiments from last night haha.

所以我做了一些樹脂顏色混合實驗來製作紫色, 並認為這裡的有些人會對結果感興趣!

圖片從右到左:
-透明藍色和透明的紅色elegoo樹脂平均混合在一起. 這不知何故變得清晰, 在黑暗中發光?? 哈哈

-紅色和藍色樹脂與美杜薩colirro珍珠色素混合. 它不想混合, 只是停留在樹脂內.

-我把紫色citadel對比色丙烯酸漆新增到混合物中, 它沒有很好, 你可以看到樹脂中很多塊.

-我在這裡新增了白色anycubic樹脂, 讓它變得更加不透明, 仍然很胖, 但仍然很好.

-在接下來的照片中, 這張照片是與樹脂混合物一起印刷的. 當時似乎都溶解, 混合在一起, 做了一個非常好的體貼和不透明的紫色, 沒有塊! :)

昨晚的實驗結束了哈哈.

· 查看原文 · 為此翻譯評分

Jennifer Tallman
2020-01-31 03:27:52

Jamie Masotti
2020-01-31 03:36:14

Keith Yinger
2020-01-31 08:55:25


原文網址 Kelly Sealey
2020-01-31 03:00:14

Just opened a new bottle of Elegoo grey resin, but realised too late that it's the ABS-Like unlike my previous bottle. Are they similar enough not to worry or should I cancel the print and rework the settings?

翻譯年糕

Kelly Sealey
2020-01-31 03:01:35

Nicholas Taylor
2020-01-31 03:02:21

Adalberto Rodriguez
2020-01-31 03:04:26

Joe Papa Behre Behrend
2020-01-31 03:04:52

Nicholas Corea
2020-01-31 03:04:57

Rob Mayberry
2020-01-31 03:05:15

Kelly Sealey
2020-01-31 03:06:51

Kelly Sealey
2020-01-31 03:08:39

Kelly Sealey
2020-01-31 03:09:03

Danny Lloyd
2020-01-31 03:10:20

Nicholas Taylor
2020-01-31 03:11:12

Nicholas Taylor
2020-01-31 03:11:57

Diego Gonzalez del Rio
2020-01-31 03:38:01

Mikel Deiman
2020-01-31 04:48:46

Dylan Yaga
2020-01-31 05:11:44

Kelly Sealey
2020-01-31 05:29:10


原文網址 Paul Ciao
2020-01-31 02:41:14

Hey guys,

I've been receiving a lot of positive feedback about my clear prints and how to achieve the "right out of the printer" look. So here some of the things I found out during my printing.

1. Biggest cause of yellowing is UV exposure. You may have heard to keep your prints out of direct sunlight as it will eventually yellow the print. This also applies to both the UV curing stage and exposure during printing. These are the 2 ways I've tackled it:

- Switched to water washable resin. I used Polyjuice's water washable resin, but I'm sure other brands will do just as fine. Other than using water instead of IPA, the huge advantage is that it does not require a UV light to cure. This removes one of the 2 biggest yellowing factors.

- Use fresh resin everytime you print. The second biggest yellowing factor is constant exposure within the printer itself. I find the resin will start to yellow after 9 hours of printing. Therefore you may want to measure how much resin you need per print (so you can refill the vat after every print) or increase the layer height to keep larger prints under the 9 hour time limit.

You can really see the difference with the UV exposure in the last photo. The model on the left was printed in eSUN clear resin which was cured using a UV nail lamp + the resin was constantly used over the course of a week. The right model is using the water washable resin that was fresh from the bottle.

2. After drying, you'll notice that the prints turn cloudy/opaque. To combat that, you can spray 2 or more medium coats of automotive clear coat (I have not tried other types). You can see the before and after in the second and third pictures. Do note that you need to coat both sides of the print to get the effect, meaning hollowed out prints will not be nearly as transparent since one side can't get sprayed.

Tldr: use fresh water washable resin and clear coat.

嘿, 朋友們,

我收到了很多積極的反饋, 關於我的清晰的列印以及如何實現"直接 從 印表機"的外觀. 所以在這裡, 我在印刷過程中發現的一些事情.

黃色的1. 個最大原因是紫外線曝光. 你可能已經聽說過讓你的列印遠離直接陽光, 因為它最終會黃色列印. 這也適用於紫外線治療階段和印刷過程中的曝光. 這是我處理的2種方法:

-切換到水洗樹脂. 我使用了polyjuice的水洗樹脂, 但我敢肯定其他品牌也會做的. 除了使用水而不是ipa, 最大的優勢是不需要紫外線來治癒. 這消除了2個最大的黃色因素之一.

-每次列印時使用新鮮樹脂. 第二個最大的黃色因素是印表機內部不斷曝光. 我發現樹脂在9小時列印後就會開始黃色. 因此, 你可能想測量每列印需要多少樹脂(這樣你可以在每次列印後填充增值稅)或增加層高度, 以保持更大的時間限制.

你真的可以看到最後一張照片中紫外線曝光的區別. 左邊的模型在esun清晰樹脂印刷, 使用紫外線燈+樹脂在一周內不斷使用. 正確的模型是使用瓶子中新鮮的水洗樹脂.

2. 烘乾後, 你會注意到, 列印變得多雲/不透明. 為了打擊這一點, 你可以噴霧2件以上的汽車清晰大衣(我還沒試過其他類型). 你可以在第二和第三張照片中看到前後. 請注意, 你需要塗上列印的兩邊才能獲得效果, 意味著空洞的列印不會像透明, 因為一方無法噴霧.

Tldr: 使用淡水可洗樹脂和清澈的外套.

· 查看原文 · 為此翻譯評分

Ken Anthony
2020-01-31 02:45:28

Oskar Amadeus Wallin
2020-01-31 02:49:50

Greg Chapman
2020-01-31 02:57:31

Matthew Atreus
2020-01-31 02:59:26

Matt Reed
2020-01-31 02:59:46

Thomas Liebig
2020-01-31 03:02:34

Nick Santana
2020-01-31 03:05:09

Nick Santana
2020-01-31 03:06:44

Justyn Pollock
2020-01-31 03:07:50

Paul Ciao
2020-01-31 03:07:53

Granit Citaku
2020-01-31 03:11:08

Greg Chapman
2020-01-31 03:20:35

Liam Walker
2020-01-31 03:21:24

Paul Ciao
2020-01-31 03:24:37

David Dorsett
2020-01-31 03:27:50

Denlee Paddy Rhodes
2020-01-31 03:28:43

Liam Walker
2020-01-31 03:29:54

Paul Ciao
2020-01-31 03:30:25

Denlee Paddy Rhodes
2020-01-31 03:30:46

Richard Shapiro
2020-01-31 03:31:07

Paul Scott
2020-01-31 03:50:07

Bruno Shepard
2020-01-31 03:55:53

Ashley Boyd
2020-01-31 03:57:38

Rene Canlas
2020-01-31 04:04:09

Anton G H Nielsen
2020-01-31 04:07:59

Jonathan Nunes
2020-01-31 04:11:30

Angus Davidson
2020-01-31 04:26:02

Jonathan Nunes
2020-01-31 04:33:08

James March
2020-01-31 04:56:44

James March
2020-01-31 04:58:05

Rebekah Anderson
2020-01-31 05:00:22

Brett Isaacs
2020-01-31 05:02:35

Shinagamei Cooley
2020-01-31 05:25:31

Justin White
2020-01-31 05:57:59

Benjamin Cole
2020-01-31 06:12:44

Ken Schmitt
2020-01-31 06:21:59

Neil Joseph
2020-01-31 06:24:56

Alison Friedlander
2020-01-31 06:46:20

Randy Schaar
2020-01-31 07:59:17

Charles Berman
2020-01-31 08:02:33

Justin Williams
2020-01-31 08:52:03

Henrik Aagerup
2020-01-31 10:15:09

Omar Baez
2020-01-31 10:15:37

Mike Rea
2020-01-31 10:58:12

Kevin Smart
2020-01-31 11:51:14

Joe Grasso
2020-01-31 12:17:05

Jon Foster
2020-01-31 12:54:27

Huynh Thien Phuoc
2020-01-31 14:24:51

Javier Alvarez
2020-01-31 15:45:56

Tamas Somogyi
2020-01-31 17:35:25

Tamas Somogyi
2020-01-31 17:37:15

Joshua Vinicio Lascano
2020-01-31 21:02:28

Mike Rea
2020-01-31 21:03:56

Oddbjørn Lona
2020-01-31 21:46:47

Andy Johnny Young
2020-01-31 23:14:26

Elly Madrigal
2020-02-01 00:09:50

Paul Ciao
2020-02-01 01:10:05

Paul Ciao
2020-02-01 01:10:56

Andrew Parish
2020-02-01 01:37:53

Oskar Amadeus Wallin
2020-02-01 02:24:45

Michael Fairley
2020-02-01 03:38:15

Nick Santana
2020-02-01 03:39:16

Paul Mendoza
2020-02-02 14:30:18

Paul Mendoza
2020-02-02 14:39:16

Paul Mendoza
2020-02-02 14:57:53

Will Noon
2020-02-03 06:59:26

Khristian Sutherland
2020-02-03 15:58:19

Khristian Sutherland
2020-02-03 15:59:07

Michaela Nomma
2020-02-03 23:30:32

Christopher Stein
2020-02-04 16:34:55

Andrew Parish
2020-02-05 23:05:56

Alex Danis
2020-02-06 05:43:51

Matt Shears
2020-02-06 12:26:53

Mason Chapman
2020-03-03 20:21:33


原文網址 Hutch Heberer
2020-01-31 01:38:44

So my Photon is making this weird noise when it lowers the bed into the resin and wont start printing. Was working perfectly fine all day yesterday? Any ideas?

翻譯年糕

Dan Hjulberg
2020-01-31 01:46:00

Hutch Heberer
2020-01-31 01:46:58

Dan Hjulberg
2020-01-31 01:47:27

Hutch Heberer
2020-01-31 01:47:34

Hutch Heberer
2020-01-31 01:48:47

Dan Hjulberg
2020-01-31 01:52:53

Hutch Heberer
2020-01-31 01:53:36

Hutch Heberer
2020-01-31 02:00:44

Hutch Heberer
2020-01-31 02:01:06

Hutch Heberer
2020-01-31 02:02:54

Dan Hjulberg
2020-01-31 02:05:02

Hutch Heberer
2020-01-31 02:08:22

Dan Hjulberg
2020-01-31 02:10:57

Hutch Heberer
2020-01-31 02:19:57

Dan Hjulberg
2020-01-31 02:21:20

Hutch Heberer
2020-01-31 02:27:54

Dan Hjulberg
2020-01-31 02:30:51

Hutch Heberer
2020-01-31 02:42:29

Dan Hjulberg
2020-01-31 02:43:38

Hutch Heberer
2020-01-31 03:13:06

Dan Hjulberg
2020-01-31 03:15:44

Hutch Heberer
2020-01-31 04:23:47


原文網址 Angel Alonso
2020-01-30 23:39:01

[SOLVED] Only the base sticks to the build plate! Hello all! I've been having issues lately with my Photon and I can't figure out what's going on with it. It was printing great but it suddenly stopped working. The base of my prints sticks to the build plate, but once it starts with the support material it gets stuck to the FEP. I changed the FEP, since it was a bit cloudy and scratched up, but same thing happens with the new FEP. The protective layer is removed. My room is at 20ºC, the resin is new, (Anycubic Grey, well stirred) and I've re-leveled (paper and flint reed method) so may times I'm going crazy with it. I printed the exposure test and I'm printing at 12sec exposure (85s bottom, 8 layers, 0.05mm) . I tried up to 20sec exposure but same results. Any help will be greatly appreciated! 翻譯年糕

Handrez Pintubola
2020-01-31 02:55:39

Angel Alonso
2020-01-31 04:09:10

Handrez Pintubola
2020-01-31 07:37:37

James Cachia-Garrett
2020-01-31 12:42:58

Tyron Craft
2020-01-31 12:52:33

Angel Alonso
2020-01-31 19:03:22

Angel Alonso
2020-01-31 21:40:06

Tyron Craft
2020-02-01 11:34:49

Angel Alonso
2020-02-02 23:51:44


 

全不選 發文排行