Anycubic Photon Printer Owners 造訪社團 » 機器

原文網址 Marc Farrimond
2020-03-29 03:36:50

Hi, I got my photon zero two days ago and cant get the slicing software to open at all, it just wont go past the initialising screen which only stays up for a few seconds then nothing happens. Obviously with the Zero having a different extension to other printers its going to be really hard to get it to work without the software. I have downloaded the file from the Anycubic site and the same thing happens, not sure if my pc is to powerful (windows 10, 8gb, 1gb graphics card), but I am at a lose as I can only print the test file that came with the machine.

I have the latest version of Cura but that doesnt seem to have a setting for the Photon Zero and likewise have downloaded Z Suite.

can anyone help at all

嗨, 兩天前我得到了我的光子零, 而且根本無法開啟切片軟體, 它只是不會通過初始化螢幕, 它只停留幾秒鐘, 然後甚麼也沒發生. 很明顯, 零與其他印表機有不同的擴展, 沒有軟體, 很難讓它運作. 我從anycubic網站下載了檔案, 同樣的事情發生, 不確定我的電腦是否強大(windows 10 gb, 8 gb, 1 gb圖形卡), 但我在輸了只能列印與機器一起的測試檔案.

我有最新版本的cura, 但似乎沒有光子零的設定, 也下載了z套件.

有人能幫忙嗎

· 查看原文 · 為此翻譯評分

Ryan Walmsley
2020-03-29 03:39:19

Have you tried ChiChuBox?

Marc Farrimond
2020-03-29 03:40:05

Yes but there is no settings for the Zero Ryan sadly

Leonard Grubbs
2020-03-29 04:08:44

Just go into Chitubox setting and click on add printer. Go to other and select default 1. Type in your resolution and the bed size and rename the profile to a name of your choice.

Evan Boone
2020-03-30 13:45:40

lol you think 8gb and a 1gb gpu is TOO powerful?! nah man something is likely wrong within your system. do you do yearly os resets? i find not doing so will usually result in issue like this. also i recomend chitubox and prusa slicer over the included software. anycubic's software is just a rip-off version of chitubox with less functionality. even if you dont see settings for your printer, you can enter then manually easily.

原文網址 Chiewata
2020-03-28 11:59:14

I would say I am so happy with this machine

我會說我對這台機器很開心

· 查看原文 · 為此翻譯評分

原文網址 J.R. DeJesus
2020-03-25 13:08:54

May as well participate in the contest being held by @anycubic3d my submission is obviously Small Soldiers related. With that said my best Anycubic print would have to be my 4 inch tall Acrher. I personally modeled this guy using zbrush and printed it on the Photon S. Larger guy has a few parts printed on the same machine. # anycubic

也不妨參加@ anycubic3d舉辦的比賽, 我的呈件顯然是小兵相關的. 既然這麼說, 我最好的任何立方體列印都必須是我的4英吋高的acrher. 我個人用zbrush模仿了這個傢伙, 並列印在光子s上. 大個子在同一台機器上印了一些零件. # anycubic

· 查看原文 · 為此翻譯評分

Salvatore Daloiso
2020-03-25 19:18:51

Woww

Michael D Showalter
2020-03-25 19:26:22

aw man, I've been looking for an stl set of all the main characters.. your's are great

Tony Shadman
2020-03-25 19:55:30

Amazing work. Any chance you are sharing the file?

Clark Paints
2020-03-25 21:57:28

Gorgonites for the win.

J.R. DeJesus
2020-03-25 23:00:54

Michael D Showalter much appreciated, I hope to offer them for sale once all 13 characters are finalized.

J.R. DeJesus
2020-03-25 23:01:15

Tony Shadman thanks, I do plan on offering them for sale in the future

J.R. DeJesus
2020-03-25 23:01:29

Clark Paints here’s to hoping ?

Richard Thomas
2020-03-26 07:33:21

Still love this film as much today as when I first saw it

J.R. DeJesus
2020-03-26 07:54:37

Richard Thomas I’m right there with ya ?

Steven Parrish
2020-03-26 08:03:50

J.R. DeJesus in the near future I hope. ?

Dan Gump
2020-03-26 11:21:39

This guy looks like Ookla the Mok

原文網址 Mike Roof
2020-03-19 03:01:36

Here's the latest on my workbench. This is my Fallout Nuka Cola machine printed on my "classic" Photon. Elgoo gray, .05 layers, 9 s normal exposure.

I've finished most the painting (just need to touch up the bottoms of the Nuka Cola bottles). This is the last mock-up for the base. I may still change some little detail or other, but I think this is pretty close to what I had in mind.

The machine is a re-mix 3D print file I found on Thingiverse. I made a fair number of changes to it, but still, I wouldn't claim it as an "original" design. I added the coin-op control details, modified the cooler box and door, and hollowed the entire thing to make it easier to print.

The bottles are my own original design, though. I tried to use another file that I found online, but it was created to print cos-play prop bottles, and after futzing around with that, it was just easier to make my own bottle design that I knew would print reliably.

The catus is from a Pegasus Models set of injection molded cactus plants. It helps balance the composition and adds a southwest desert feel.

I sketched up the layout and played around with it a bit before I made this foundation piece from sheet and strip styrene. It'll get glued down to a piece of foam to give some presence and height to the final display. Lots more work to do on the base, but I think this little project is coming along nicely.

Happy modeling!

這是我的工作台上的最新訊息. 這是我在我的"經典"光子上列印的核可樂機. Elgo gray 05層, 9 s正常曝光.

我完成了大部分繪畫(只需要摸一下nuka可樂瓶的底部). 這是基地的最後一個模型. 我可能仍然會改變一些小細節, 但我認為這和我的想法相當接近.

這台機器是我在thingiverse上發現的3 d列印檔案. 我對它做了相當多的修改, 但仍然, 我不會聲稱它是"原創"設計. 我新增了硬幣操作控制細節, 修改了冷卻器盒和門, 把整件都空洞, 讓列印更容易列印.

瓶子是我自己的原創設計. 我嘗試使用我在網上找到的另一個檔案, 但它是為了列印cos-play道具瓶子而創建的, 然後用它打亂後, 我知道可以可靠列印的瓶子設計更簡單.

Catus是來自一套飛馬座噴射模型的仙人掌植物. 它有助於平衡成分, 增加西南沙漠的感覺.

在我用床單和脫衣櫃和脫衣舞的底片之前, 我繪制了佈局並玩弄了一下. 它會粘在一塊泡沫上, 讓最終展示一些存在和高度. 基地還有很多工作要做, 但我認為這個小項目進展順利.

快樂的模特!

· 查看原文 · 為此翻譯評分

Alwin Chan
2020-03-19 03:03:31

Alwin Chan
2020-03-19 03:04:48

Douglas J. Behringer
2020-03-19 03:06:11

Kory Kendziora
2020-03-19 03:10:32

Mike Roof
2020-03-19 03:10:48

Douglas J. Behringer
2020-03-19 03:13:07

Mike Roof
2020-03-19 03:13:20

Mika Gruszka
2020-03-19 03:22:17

Ryan Smith
2020-03-19 03:22:34

Mike Roof
2020-03-19 03:27:01

Mike Roof
2020-03-19 03:28:13

Heiko Zschimmer
2020-03-19 03:28:37

Mike Roof
2020-03-19 03:29:38

Dada Man
2020-03-19 03:38:47

Nickolaus Oneal
2020-03-19 04:02:14

Robert Stoneman
2020-03-19 04:16:18

Robert Stoneman
2020-03-19 04:17:24

Keith Yinger
2020-03-19 04:42:28

Derek Fontes
2020-03-19 04:49:13

Victor Falendysh
2020-03-19 04:58:35

Mika Gruszka
2020-03-19 07:18:01

Paul E Nickolan
2020-03-19 08:07:30

Carlos Enrique Murcia
2020-03-19 11:17:55

Alwin Chan
2020-03-19 11:27:50

Mike Roof
2020-03-19 12:50:37

Mike Roof
2020-03-19 12:59:32

Connor DjGlargum Whitesell
2020-03-19 20:46:28

Mike Roof
2020-03-19 22:28:38

原文網址 J.R. DeJesus
2020-03-17 11:18:24

What do you do to take your 3d print to the next level? You design and fabricate the fictional boxes shown in the film. These are actually a second draft and will need further adjustments. Cut and assembled corrugated blank, cut & applied the printed graphics to the box blank. The part I like the least is done, cutting, scoring & shaping these plastic display windows is no fun ? these would normally be vac formed but I don’t have access one of those machines. Archer print is a mix of FDM & resin prints.

你要怎麼做才能把你的3 d列印帶到下一個水平? 你設計和編造電影中出現的虛構盒子. 這些實際上是第二稿, 需要進一步調整. 剪掉並組裝腐敗的空白, 剪掉並套用列印的圖形到盒子空白. 我最喜歡的部分是完成, 切割, 得分和塑料顯示視窗並塑料顯示器不好玩 ? 這些通常是vac形成的, 但我無法進入其中一個機器. Archer print是fdm和樹脂列印的混合.

· 查看原文 · 為此翻譯評分

Mark Wardle
2020-03-17 11:22:54

taking it to the next level. :)

Damo Cramp
2020-03-17 11:23:57

That’s amazing J.R. DeJesus well done

J.R. DeJesus
2020-03-17 11:25:38

Mark Wardle 100%

J.R. DeJesus
2020-03-17 11:25:46

Damo Cramp much appreciated

James Witchard
2020-03-17 11:43:54

That looks awesome! Is the figure itself articulated or just a static print?

Codey Meeks
2020-03-17 11:47:48

This is awesome! You really took it to the next level. Do you have the rest of them printed on the shelf above too?

J.R. DeJesus
2020-03-17 11:50:50

James Witchard thanks, it’s a static piece but it is segmented for ease of printing and appearance

Shig Bergin
2020-03-17 16:24:45

What printer (2D) do you have for these big prints?

Patrick Harland
2020-03-17 16:58:03

Amazing ?

Derek Mears
2020-03-17 17:50:34

Amazing

Telli Mantelli
2020-03-17 18:07:33

Awesome!

J.R. DeJesus
2020-03-17 22:37:05

Codey Meeks thanks & yes

J.R. DeJesus
2020-03-17 22:38:03

Shig Bergin I print on 11” x 17” and splice the larger parts together like I use to with refacing counter tops ?

Eric Leas
2020-03-17 23:57:03

Amazing work

Marcin Kaleta
2020-03-18 06:07:18

Haha damn great work

Codey Meeks
2020-03-19 03:32:49

J.R. DeJesus that's cool as hell! You're doing a solid job on everything man. Definitely post it all finished ?

原文網址 Leonardo Escovar Quintero
2020-03-12 03:49:14

Hello!

I'd love to share the latest easy to print designs I sculpted on Zbrush printed on my Anycubic photon and also the original renders so you can compare and see how well a STL translate into a 3D print, preserving all the details.

The models are mostly supportless and the big ooze is pre-supported, they were printed in 0,03 mm layer height, printed in two different sizes. The bigger ones were primed in order to highlight details. You can also check all the models together in a smaller size for tabletop games.

Seriously, this machine is awesome! I'm considering upgrade to the Anycubic photon S soon. If you have any question related please let me know!

Cheers,

Leo.

你好!

我很樂意分享我在zbrush上列印的最新的設計, 以及原始渲染圖案, 以便你可以比較並檢視stl翻譯成3 d列印, 儲存所有細節.

這些模型大多是沒有支援的, 大ooze是預先支援的, 它們列印在0,03 mm層高度, 印制兩種不同尺寸. 更大的, 是為了突出細節. 你也可以一起檢視所有模型, 以較小的桌上的遊戲.

說真的, 這台機器太棒了! 我正在考慮很快升級到anycubic光子s. 如果你有任何問題, 請告訴我!

乾杯,

里奧.

· 查看原文 · 為此翻譯評分

Billy Pauler
2020-03-12 04:05:10

Leonardo Escovar Quintero
2020-03-12 04:07:47

Wes Mischke
2020-03-12 04:21:27

Leonardo Escovar Quintero
2020-03-12 04:22:04

Marcin Smoliński
2020-03-12 04:31:02

Leonardo Escovar Quintero
2020-03-12 04:31:39

Wes Mischke
2020-03-12 04:32:25

Leonardo Escovar Quintero
2020-03-12 04:33:34

Shawn Atlas
2020-03-12 04:50:12

Aaron Maynard
2020-03-12 04:51:03

Leonardo Escovar Quintero
2020-03-12 04:52:46

Shawn Atlas
2020-03-12 05:27:22

Leonardo Escovar Quintero
2020-03-12 05:29:13

Shawn Atlas
2020-03-12 05:29:23

Shawn Atlas
2020-03-12 05:30:58

Philip Reeves
2020-03-12 05:39:38

Leonardo Escovar Quintero
2020-03-12 05:42:48

Philip Reeves
2020-03-12 05:50:42

Dillon Olney
2020-03-12 06:58:19

Leonardo Escovar Quintero
2020-03-12 07:10:53

Shawn Atlas
2020-03-12 07:27:47

Leonardo Escovar Quintero
2020-03-12 07:31:44

Jim Appleby
2020-03-12 10:17:00

Wes Mischke
2020-03-12 10:23:17

Wes Mischke
2020-03-12 10:28:35

Leonardo Escovar Quintero
2020-03-12 11:06:01

Pablo Lescano
2020-03-12 12:16:14

Leonardo Escovar Quintero
2020-03-12 12:28:24

Wes Mischke
2020-03-12 14:40:01

Wes Mischke
2020-03-12 14:41:44

Wes Mischke
2020-03-12 22:25:45

Leonardo Escovar Quintero
2020-03-13 01:38:27

原文網址 Thomas Holm
2020-03-12 00:58:40

My first technical fail. The build plate came loose and unlevelled. So the base is uneven and there is a layer shift some 4 cm up. So will need to re-level and tighten that srew better.
At the same time I'm very impressed. Apart from the layer shift the print quality is great! (0.01 mm, 7 s main layers, 60 s baselayer, Anycubic Green Transparent that came with the machine.) Two spots where I need to move a support (Thank You 3DPrintingPro), but other than that actually a great print.
So thank you all for the advice you give here and on other platforms.

我的第一個技術失敗. 構建板鬆散並解開. 所以基地是不均衡的, 有一個層移大約4釐米. 所以, 需要重新調整並收緊這個更好.
同時, 我印象深刻. 除了層層輪換, 列印質量也很棒! (0.01 mm, 7 s主層, 60 s baselayer, 任何與機器一起帶來的綠色透明.)兩個我需要移動支援的兩個地方(謝謝3 dprintingpro) , 但除此之外, 實際上是一個偉大的印刷品.
所以感謝大家在這裡和其他平台上的建議.

· 查看原文 · 為此翻譯評分

Sander van Deijl
2020-03-12 01:51:58

Thomas Holm
2020-03-12 01:56:45

Hoghead Hoffer
2020-03-12 12:25:59

原文網址 Pierre Gelinas
2020-03-09 22:40:35

Hi … I just got an Anycubic Wash and Cure Machine and I wanted to be able to let the Washing Basket on the Machine itself to drip in the IPA Tub and so I have design a 2 Parts Adapter that you can fit on the top of the Machine and Hook the Basket on it and let it drip and dry there for the time the IPA Evaporate from the parts and Basket … then you can remove it and install the Rotary bed and cure the Parts … this is my first Draft but I am already thinking of another Bracket that might be easier to Print …. Enjoy!

here is the link to the thingiverse page

https://www.thingiverse.com/thing:4211287

嗨... 我剛買了一台任何立方體洗滌和治癒機, 我想讓機器上的洗衣籃滴在ipa浴缸里, 所以我設計了一個2個2個零件介面卡機器的頂部, 把籃子綁在上面, 讓它滴滴和乾燥, ipa從零件和籃子蒸發時... 然後你就可以把它移走, 安裝旋轉床治癒... 是我的第一份草稿, 但我已經在考慮另一個可能更容易列印的括號.... 享受吧!

這是thingiverse頁面的連結

https://www.thingiverse.com/thing:4211287

· 查看原文 · 為此翻譯評分

Stan Westmoreland
2020-03-09 22:51:53

Mason Chapman
2020-03-09 23:04:42

Kirk Sturgulewski
2020-03-10 00:00:19

Pierre Gelinas
2020-03-10 00:25:12

Pierre Gelinas
2020-03-10 00:26:45

Kirk Sturgulewski
2020-03-10 00:28:06

Pierre Gelinas
2020-03-10 00:30:24

Pierre Gelinas
2020-03-10 00:35:09

Pierre Gelinas
2020-03-10 00:35:35

Kirk Sturgulewski
2020-03-10 00:53:50

Stan Westmoreland
2020-03-10 01:21:02

Mark Rhodes
2020-03-10 04:02:23

Ben Knipper
2020-03-10 09:58:39

Pierre Gelinas
2020-03-10 23:16:30

原文網址 Michael Enoches
2020-03-08 23:25:48

So now that I owned resin printers for 18 months now I have some info for you all.
After 1000 hrs on the Photon S screen replacement and one going at 2000 hrs and still going. What I did when they came in was I looked at the whole machine all sides and such. And tried an experiment. There is a large fan on the bottom of these machines as well as Egeloo mars and others. They all have feet that raise the unit up about 1 inch at most. So I decided to raise one Mars and then One Photon I cut a hole below the unit into my stand/platform where the fan/unit would be above. This created better air flow and I have found that machine runs less hot and the lcd lasted longer up to 2x as much. So I would say Rasie Your Machines off the platform you have it on. See photos below on my test units. I have 8 Photons and 4 Mars machines and s400s and Phenom and Transform machines here as well.
Good luck and Happy Printing.
Michael LR3D

所以現在我擁有樹脂印表機18個月, 現在我有一些資訊告訴大家.
1000小時後, 光子s螢幕更換, 一個在2000小時後, 仍在進行中. 他們進來的時候我所做的是我看著整個機器的各個方面等等. 嘗試了一個實驗. 這些機器的底部有一個大粉絲, 還有egeloo火星和其他人. 他們都有腳能讓單元提高了大約1英吋. 所以我決定舉起一顆火星, 然後一個光子, 我在單位下面切了一個洞進入我的站台/平台上的球迷/平台. 這創造了更好的空氣流動, 我發現機器運行更少, 液晶顯示器持續更長至2倍. 所以, 我想說rasie你的機器離開了平台. 在我的測試單元檢視下面的照片. 我這裡還有8個光子和4個火星機器, s400s和phenom和變形機.
祝你好運, 印刷快樂.
邁克爾· l3d

· 查看原文 · 為此翻譯評分

Todd Norton
2020-03-08 23:28:38

Kees van Dongen
2020-03-08 23:29:20

Benjamin Wijaya
2020-03-09 00:00:03

Michael Enoches
2020-03-09 00:02:53

Benjamin Wijaya
2020-03-09 00:07:36

Michael Enoches
2020-03-09 01:03:05

Benjamin Wijaya
2020-03-09 01:06:03

Nipuna Gunarathne
2020-03-09 03:48:34

Jon Allitt
2020-03-09 04:20:00

Jonny Marable
2020-03-09 05:29:08

Michael Enoches
2020-03-09 05:31:48

Rantinan Winters
2020-03-09 09:47:37

Richard Hale
2020-03-09 16:56:01

Michael Enoches
2020-03-09 17:18:05

Michael Enoches
2020-03-09 17:19:15

David Wenrich
2020-03-11 23:46:57

原文網址 Nick Williams
2020-03-07 11:14:04

Is there ANY reason I shouldn’t take off the lid? The glovebox is UV protected, and I hate that I have to take the entire machine out each time. It’s under vacuum so I don’t have to worry much about dust.

有甚麼理由我不應該摘下蓋子嗎? Glovebox受到紫外線保護, 我討厭每次都要拿出整個機器. 它在真空中, 所以我不用擔心灰塵.

· 查看原文 · 為此翻譯評分