Anycubic Photon Printer Owners 造訪社團

原文網址 Kris McEwan
2020-02-12 01:00:44

Ok did a shoot out today. All same method using elegoo green clear resin and a small ultrasonic cleaner for 3 mins. Rinsed in cold water then 10 mins under uv light
This is to find a solution most people have to hand (or under my kitchen sink). in UK selection is limited. Prices updated per litre I paid

1 brake cleaner. Good but cloudy. Not exactly the best for toxicity and disposal £4 per litre
2 pine disenfectant 25% solution good and pretty clear. 10%. Not so good still marks on surface £1 per litre before dilution
3 orange surface cleaner. Useless doesn’t really get rid of the resin needs scrubbed £1.50 per litre
4 cillit bang kitchen degreaser. Not bad at all. Still cloudy. £3 per litre
5. IPA. Cleanest surface finish but dull on clear resin. £10 per litre
6 gunk degreaser. Best looking finish and clearest. Downside is it’s almost as toxic as resin. £5 per litre.

Overall IPA is best if your not using a clear resin and want to paint best surface feel. If your looking for clarity Gunk degreaser wins but be careful with it. Best all rounder is pine disinfectant at 25-30% solution.

FINALLY. For cleaning up. IPA followed by Cillit Bang is cleaning up the mess brilliantly

好吧, 今天拍了. 使用elegoo綠色清樹脂和小型超聲波清潔器3分鐘. 在冷水中沖洗, 然後在紫外線下10分鐘
這是為了找到一個解決方案, 大多數人必須交出(或者在我的廚房水槽下面). 在英國的選擇是有限的. 每公升都更新價格

1剎車清潔器. 好, 但多雲. 不完全適合毒性和處置, 每公升4英鎊
2松樹消毒25 %的溶液很好, 相當清晰. 10 %. 在淡化之前, 表面還不太好的痕跡, 每公升£ 1
3橙色表面清潔劑. 沒用的樹脂真的不會被擦掉每公升1.50英鎊
4 cillit bang kitchen delit. 還不錯. 還是多雲. 每公升3英鎊
5. ipa. 最乾淨的表面完成, 但在清澈的樹脂上沈悶. 每公升10英鎊
6 gunk dealaser. 最好的看完, 最清晰. 缺點是它幾乎和樹脂一樣有毒. 每公升5英鎊.

如果你不使用清晰的樹脂並想要畫最好的表面感覺, 整體ipa最好. 如果你尋找清晰度gunk deaser獲勝, 但要小心. 最好的rounder是松樹消毒劑, 達到25-30 %的溶液.

終於. 為了清理. Ipa接著是cillit bang正在精緻地清理混亂

· 查看原文 · 為此翻譯評分

Mark Wardle
2020-02-12 01:09:16

Brandon Ray
2020-02-12 01:15:10

Cannon Rigger
2020-02-12 01:15:50

Kris McEwan
2020-02-12 01:16:59

Kris McEwan
2020-02-12 01:17:48

Kris McEwan
2020-02-12 01:18:25

Brian King
2020-02-12 01:19:11

Edward August Szczepanski
2020-02-12 01:20:00

Kris McEwan
2020-02-12 01:20:05

Alan Bullard
2020-02-12 01:20:37

Brian King
2020-02-12 01:21:02

Kris McEwan
2020-02-12 01:23:37

Tony Moura
2020-02-12 01:23:59

Jason Dickson
2020-02-12 01:24:11

Tony Moura
2020-02-12 01:24:57

Jehú Paulín
2020-02-12 01:25:03

Kris McEwan
2020-02-12 01:25:25

Kris McEwan
2020-02-12 01:25:45

Jehú Paulín
2020-02-12 01:26:10

Tony Moura
2020-02-12 01:26:23

Jim Nelson
2020-02-12 01:27:02

Kris McEwan
2020-02-12 01:27:53

Alan Bullard
2020-02-12 01:28:07

Erik Waring
2020-02-12 01:28:09

Jimmy Gent
2020-02-12 01:28:34

Tony Moura
2020-02-12 01:28:44

Kris McEwan
2020-02-12 01:28:57

Tony Moura
2020-02-12 01:29:37

Kris McEwan
2020-02-12 01:29:43

Tony Moura
2020-02-12 01:30:17

Alan Bullard
2020-02-12 01:30:32

Kris McEwan
2020-02-12 01:30:51

Bob Deblier
2020-02-12 01:30:56

Kris McEwan
2020-02-12 01:32:25

Tony Moura
2020-02-12 01:32:26

Tony Moura
2020-02-12 01:33:34

Jimmy Gent
2020-02-12 01:33:40

Alan Bullard
2020-02-12 01:33:45

Matt Hooton
2020-02-12 01:35:02

Kris McEwan
2020-02-12 01:35:04

Alan Bullard
2020-02-12 01:35:18

George Bulte
2020-02-12 01:36:28

Alan Bullard
2020-02-12 01:37:33

Kris McEwan
2020-02-12 01:41:08

Harrie Kools
2020-02-12 01:42:35

Tom Sargison
2020-02-12 01:47:23

Tony Moura
2020-02-12 01:48:17

Sercan Güzel
2020-02-12 02:05:32

Vincent Balmont
2020-02-12 02:12:18

Radek Voltr
2020-02-12 02:18:16

Brian Jensen
2020-02-12 02:34:04

Kris McEwan
2020-02-12 02:35:42

Nat Sinclair
2020-02-12 03:05:08

Kris McEwan
2020-02-12 03:08:34

Nat Sinclair
2020-02-12 03:09:27

Nat Sinclair
2020-02-12 03:10:48

Jacob Armour
2020-02-12 03:26:54

George Bulte
2020-02-12 03:27:32

Vincent Balmont
2020-02-12 06:47:49

Kevin Smith
2020-02-12 06:51:51

Karel Svoboda
2020-02-12 08:24:08

David Hargrove
2020-02-12 10:34:56

Roger Munguia
2020-02-12 13:07:57

Kris McEwan
2020-02-12 15:14:44

Tony McCole
2020-02-12 16:41:10

Piotr Krucki
2020-02-12 16:59:13

Luca Cavallari
2020-02-12 19:09:48

Joel Reid
2020-02-12 19:24:33

Kris McEwan
2020-02-12 19:44:51

Nick Rushby
2020-02-12 20:06:37

Bob Deblier
2020-02-12 20:09:14

Nick Rushby
2020-02-12 20:09:42

Nick Rushby
2020-02-12 20:10:35

Angus Sanders
2020-02-12 20:11:10

Bob Deblier
2020-02-12 20:11:33

Nick Rushby
2020-02-12 20:12:19

Bob Deblier
2020-02-12 20:13:29

Evan Boone
2020-02-12 20:36:08

原文網址 Vasilis Mavrogenis
2020-02-12 01:00:15

Curious question - Removal of supports before or after curing? Curious question - Removal of supports before or after curing? 翻譯年糕

Liam Walker
2020-02-12 01:00:38

Joseph Daniels
2020-02-12 01:01:07

Jesper Hvid
2020-02-12 01:01:21

Jerry Barnes
2020-02-12 01:03:10

Vít Kuře Prokop
2020-02-12 01:03:54

Ed Obarowski
2020-02-12 01:03:58

Jlee Usn
2020-02-12 01:04:14

Ryan Pennington
2020-02-12 01:04:19

Alexis Canizalez
2020-02-12 01:04:20

Matthew King
2020-02-12 01:06:06

Cannon Rigger
2020-02-12 01:09:08

Eric Ilaqua
2020-02-12 01:10:48

Siva-Jack Sernvongsat
2020-02-12 01:12:38

Jim Nelson
2020-02-12 01:14:04

Brian King
2020-02-12 01:14:45

Daniel Faubert
2020-02-12 01:23:29

Matthias Dlugi
2020-02-12 01:29:39

Gregore Conn
2020-02-12 01:34:34

Andrea Cafiero
2020-02-12 01:34:44

Brendan Wood
2020-02-12 01:43:50

Wes Mischke
2020-02-12 01:45:37

Jason Willis
2020-02-12 01:49:29

Ron Staton
2020-02-12 02:01:59

Kenneth Johansen
2020-02-12 02:02:04

Brook Swartz
2020-02-12 02:08:33

Eddie Chamberlain
2020-02-12 02:13:02

Shawn McDonald
2020-02-12 02:25:39

Wes Mischke
2020-02-12 02:29:54

Alexander Bayerdorffer
2020-02-12 03:16:03

Ed Horn
2020-02-12 04:03:22

Colin Hansen Perras
2020-02-12 05:00:30

Clint B. Kauffman
2020-02-12 05:06:04

Ken Van De Sompel
2020-02-12 05:32:27

Joseph Brancik
2020-02-12 05:41:18

James Hendrix
2020-02-12 05:54:07

Chris Thiessen
2020-02-12 05:57:47

Mikhail Rohrlach
2020-02-12 06:11:07

JP Kerr
2020-02-12 06:37:20

Michael Riehl
2020-02-12 06:37:33

James Hendrix
2020-02-12 06:38:13

Dennis M. Burns
2020-02-12 07:07:55

Michael Riehl
2020-02-12 07:13:42

Zeb Christmas
2020-02-12 07:49:54

Joseph Haiflich
2020-02-12 08:20:59

Joe Garry
2020-02-12 10:40:56

Patrick Beedgen
2020-02-12 18:15:47

Robert Nisson
2020-02-12 18:26:14

Ivan Antharon Antalec
2020-02-12 19:09:06

Leon Skopilianos
2020-02-12 19:40:18

Arthur Withier
2020-02-12 20:35:35

Keif Davies
2020-02-12 21:18:48

Tony McCole
2020-02-12 23:27:21

Randall Nall
2020-02-13 00:05:24

James Hendrix
2020-02-13 00:06:58

Randall Nall
2020-02-13 00:11:57

James Hendrix
2020-02-13 00:12:55

Randall Nall
2020-02-13 00:40:16

John Bear Ross
2020-02-13 00:44:25

Ozkan Basak Yildiz
2020-02-13 03:09:30

Nicolas Chaussois
2020-02-13 06:06:42

Tom Barnes
2020-02-13 09:05:25

Johannes Weis
2020-02-14 05:07:36

原文網址 Paul Metcalfe
2020-02-12 00:39:29

Hi everyone, I have a Photon S, and at the moment have only been printing with the clear red resin which came with the printer. The prints tend to end up over thickened, which i gather may be due to the light diffusing through the clear cured resin(?) my spec for the printer is a need for dimensional accuracy, I.e. Cad to printed part need to be as exact as possible, as the prints are for testing components (sorry I can’t reveal anymore than that). So can anyone recommend a suitable resin to use in the Photon S please?

apologies if this is a topic already well covered, but searching only seems to bring up ambiguous leads.

翻譯年糕

Sander van Deijl
2020-02-12 00:42:34

Jason Pedersen
2020-02-12 00:44:53

Paul Metcalfe
2020-02-12 00:45:16

Paul Metcalfe
2020-02-12 00:46:34

Tobi Altebaeumer
2020-02-12 01:00:02

Jeff Surma Jr.
2020-02-12 01:07:03

Nipuna Gunarathne
2020-02-12 01:07:15

Jason Pedersen
2020-02-12 01:10:49

Bob Deblier
2020-02-12 01:39:42

Bob Deblier
2020-02-12 01:42:01

Jason Pedersen
2020-02-12 03:37:52

Bob Deblier
2020-02-12 03:38:58

Paul Metcalfe
2020-02-12 05:24:48

Paul Metcalfe
2020-02-12 05:27:05

Paul Metcalfe
2020-02-12 05:27:56

Jeff Surma Jr.
2020-02-12 06:03:19

Paul Metcalfe
2020-02-12 06:27:39

Nipuna Gunarathne
2020-02-12 06:48:52

Nipuna Gunarathne
2020-02-12 14:54:55

Nipuna Gunarathne
2020-02-12 21:44:56

原文網址 Chase Wichert
2020-02-12 00:31:40

I know this is for Photons, but does anyone have any experience with the Creality3D LD-002R ? It doesn't look too bad price wise. But you never know what you are actually going to get.

翻譯年糕

原文網址 Ben De St Paér-Gotch
2020-02-12 00:18:03

So I always stick anti-aliasing on at 1.. but I realized I don't know what this really does or what the different numbers mean.. Anyone got a good article or vide?

翻譯年糕

Nipuna Gunarathne
2020-02-12 01:52:24

Nipuna Gunarathne
2020-02-12 01:53:21

Nipuna Gunarathne
2020-02-12 01:55:01

Ben De St Paér-Gotch
2020-02-12 02:37:31

原文網址 Matthias Dlugi
2020-02-12 00:17:55

Hey Guys, maybe you can help me with my issue. I have printed several models, in several orientations. Everytime i have the same issue. The supported Parts (like the whole bottom of the model) has missing details and even supports look like they are melted together in some spots. The topside of the model looks great. I also tried different resins and different curing times. Will post some pictures of a model having those issues. Anybody an idea whats wrong?

翻譯年糕

Chad Cox
2020-02-12 00:20:08

Franz Meriles
2020-02-12 00:21:27

Matthias Dlugi
2020-02-12 00:24:05

Giancarlo Arriola
2020-02-12 00:27:44

Franz Meriles
2020-02-12 00:28:29

Matthias Dlugi
2020-02-12 00:50:37

Matthias Dlugi
2020-02-12 00:59:26

Chris Rees
2020-02-12 01:05:41

Chris Rees
2020-02-12 01:06:33

Matthias Dlugi
2020-02-12 01:09:43

Giancarlo Arriola
2020-02-12 01:31:32

Giancarlo Arriola
2020-02-12 01:32:29

Matthias Dlugi
2020-02-12 01:35:38

Giancarlo Arriola
2020-02-12 01:36:40

Matthias Dlugi
2020-02-12 01:36:50

Andrés Seoane
2020-02-12 10:06:38

James Ho
2020-02-12 15:24:36

Matthias Dlugi
2020-02-12 17:08:27

Sander van Deijl
2020-02-12 18:49:49

Sander van Deijl
2020-02-12 18:51:24

Nicolai Lorenzen
2020-02-14 04:53:41

原文網址 Jamie Masotti
2020-02-12 00:06:11

advice on how to avoid getting chunks taken out of your model when you remove the supports?

翻譯年糕

Will Koone
2020-02-12 00:08:26

Jamie Masotti
2020-02-12 00:09:10

Mark Reynolds
2020-02-12 00:09:22

Paul West
2020-02-12 00:09:46

Chris Thompson
2020-02-12 00:09:50

Mike Wheway
2020-02-12 00:10:27

Will Koone
2020-02-12 00:10:38

Dave Green
2020-02-12 00:25:21

Brendan Wood
2020-02-12 00:30:35

Gregore Conn
2020-02-12 01:08:54

Jim Nelson
2020-02-12 01:23:15

James Cachia-Garrett
2020-02-12 04:22:25

John Chrapkowski
2020-02-12 13:20:28

John Chrapkowski
2020-02-12 13:20:51

Sercan Güzel
2020-02-12 23:16:30

Huw Rodgers
2020-02-13 05:07:12

Gregore Conn
2020-02-13 13:06:12

Huw Rodgers
2020-02-13 13:29:59

Blaze Dodd
2020-02-21 16:58:29

原文網址 Joshua Meyer
2020-02-12 00:00:39

Thanks for the help to the group so far. Going to go for something "simple" and less detailed. Here are two images of the exhaust vent adapter and the settings. I'm in room temperature, and the plate has been re-leveled. Thoughts?

翻譯年糕

Ken Lebofsky
2020-02-12 00:04:16

Franz Meriles
2020-02-12 00:15:41

Joshua Meyer
2020-02-12 00:20:06

Joshua Meyer
2020-02-12 00:21:00

Clifford Schwankner
2020-02-12 00:21:00

Clifford Schwankner
2020-02-12 00:23:38

Joshua Meyer
2020-02-12 00:23:43

Joshua Meyer
2020-02-12 00:28:13

Joshua Meyer
2020-02-12 00:28:39

Giancarlo Arriola
2020-02-12 00:28:49

Franz Meriles
2020-02-12 00:29:43

Joshua Meyer
2020-02-12 00:44:24

Clifford Schwankner
2020-02-12 00:45:21

Clifford Schwankner
2020-02-12 00:46:41

Joshua Meyer
2020-02-12 00:47:19

Nick Eason
2020-02-12 00:49:39

Clifford Schwankner
2020-02-12 00:49:44

Clifford Schwankner
2020-02-12 00:53:50

Joshua Meyer
2020-02-12 00:54:35

Mark Bryner
2020-02-12 01:49:42

Neil Castle
2020-02-12 05:20:09

Zeb Christmas
2020-02-12 08:37:19

Vincent Balmont
2020-02-12 09:36:30

Tibi Sucuturdean
2020-02-12 20:03:16

原文網址 Jozef Orenič
2020-02-11 23:53:58

Hi Guys, this link: http://statusavailable.pt/auctions/ is in Google sheet "Anycubic Photon Resin Settings"...but when I want to order it, 404 error appears. Probably this page doesn't work at all? :) 翻譯年糕

Rob van Doorn
2020-02-12 00:01:40

Vinicius Silva
2020-02-12 00:47:14

Artur Fuste
2020-02-12 01:11:09

Artur Fuste
2020-02-12 01:14:06

Vinicius Silva
2020-02-12 01:34:47

Artur Fuste
2020-02-12 01:36:38

Jozef Orenič
2020-02-12 01:55:42

Jozef Orenič
2020-02-12 01:55:50

Artur Fuste
2020-02-12 01:57:41

Jozef Orenič
2020-02-12 01:59:04

Jozef Orenič
2020-02-12 01:59:16

Artur Fuste
2020-02-12 02:00:08

Jozef Orenič
2020-02-12 02:00:28

Artur Fuste
2020-02-12 02:25:59

Artur Fuste
2020-02-12 02:31:53

原文網址 Kyle McPherson
2020-02-11 23:50:46

I have a question that has been bugging me for a while. When setting up a file for print where you are printing multiple models. Will it hurt anything to let the support bases overlap eacher a little bit?

翻譯年糕

Casey Shiray
2020-02-11 23:51:37