管理員
統計數據
原文網址 Vera Ermakova 2020-03-29 17:38:26
Good day!
I want to share my first work using 3D printing. And this is also my first experience with 3D sculpting. I started work with mastering # Mudbox and really loved this program. I hope it will replenish and develop, because, Despite the lack of many useful features from Zbrush, Mudbox is very convenient and has an absolutely intuitive and comfortable interface.
For printing, I used Model Clear resin and Model Cherry from # HARZLabs ,
Model Clear used for the eyes, water droplets on the wings and an imitation of a cloud, followed by tinting in alcohol with a caller from washing with Model Cherry. The result is quite an interesting result.
The wings were printed on another printer, FDM format. As a result, I am convinced that for most of my tasks, I need very high detail, which is available only to DLP, LCD printers so far.
日安!
我想用3 d列印分享我的第一部作品. 這也是我第一次與3 d雕塑的體驗. 我開始與masting # mudbox合作 , 真的很喜歡這個節目. 我希望它能補充和發展, 因為儘管zbrush缺乏許多有用的功能, 但mudbox還是非常方便, 有著絕對直觀和舒適的介面.
列印時, 我使用了#harzlabs的模特清樹脂和櫻桃模型,
模特清晰用於眼睛, 翅膀上的水滴和模仿雲彩, 然後在酒精中與一個來電者洗滌. 結果是相當有趣的結果.
翅膀印在另一台印表機fdm格式上. 因此, 我相信, 在我的大部分任務中, 我需要非常詳細的細節, 迄今為止只有dlcd印表機.
Marco Schmitz 2020-03-29 17:43:25
possible to get the stl? love it! great work!
Vera Ermakova 2020-03-29 17:51:01
Marco Schmitz Thank you, I'm glad that you liked the work! Unfortunately I do not give stl, it is important for me to preserve the uniqueness of the work.
Gold Walker 2020-03-29 18:09:08
How much to make a custom design for me ?
Dmitry K Valberg 2020-03-29 18:12:28
That is some great work!
Rastko Stanojevic 2020-03-29 19:11:59
Beatiful work! I've been following your posts and thanks for tips :)
Luis de la Peña 2020-03-29 20:06:51
Another great job.... Congrats!!
Olivier Aidouni 2020-03-29 20:25:19
Sargent Raze 2020-03-29 20:28:12
Omg this is the cutest thingbive ever seen
Michael Fieweger 2020-03-29 20:29:40
Amazing work!
Francesco Ostili 2020-03-29 20:30:59
I'd like to know more about the process of creation of the eyes :o how did you do them? They are WONDERFUL!
Ingemar Rååd 2020-03-29 20:48:26
WOW! This is totally amazing work! Be proud of this! ?? ?? ?? ?
Marcelo Chcrapetz 2020-03-29 20:52:07
❤️ ❤️ ❤️
Vera Ermakova 2020-03-29 21:03:12
Gold Walker , Do you mean 3D model, or complete creature?
Vera Ermakova 2020-03-29 21:03:43
Dmitry K Valberg Thanks!
Vera Ermakova 2020-03-29 21:04:44
Rastko Stanojevic thank you very much, I appreciate that!!
Vera Ermakova 2020-03-29 21:05:25
Luis de la Peña Thank you!!
Vera Ermakova 2020-03-29 21:05:59
Sargent Raze Thanks :)
Vera Ermakova 2020-03-29 21:09:26
Michael Fieweger Thanks! I always try my best! :)
Vera Ermakova 2020-03-29 21:11:58
Francesco Ostili Oh, they're made from 2 separate parts. Clear hemisphere and iris part. and then they're glued with clear resin.
Vera Ermakova 2020-03-29 21:12:51
Ingemar Rååd Thank you very much!
Francesco Ostili 2020-03-29 21:17:15
Vera Ermakova but are they 3D printed? :O
Vera Ermakova 2020-03-29 21:17:48
Francesco Ostili Yeah, they are :)
Francesco Ostili 2020-03-29 21:22:57
How did you create that effect (the iris) with the resin? Did you mesh differet colour? I heard you were going to release a tutorial. am I wrong?
Vera Ermakova 2020-03-29 21:29:51
Francesco Ostili Iris - is separate part, which I paint manually, before glue it with hemisphere. I told that I could make a tutorial someday, but currently I have no time for that...
Pedro Torres 2020-03-29 21:40:00
Awesome work!!!!! You are amazing!!
Vera Ermakova 2020-03-29 21:47:00
Pedro Torres Thank you so much!!
Gold Walker 2020-03-29 22:18:44
Vera Ermakova yes
Michael Inwood 2020-03-29 22:18:53
From Russia with love, amazing colour and detail. You are truly gifted artist. ??
Ernest Sandridge Ill 2020-03-29 22:53:10
That still looks like some amazing detail though. Good job!
Chad Weber 2020-03-29 23:25:59
Mind blown
Josh Tollison 2020-03-29 23:48:39
I'm over here printing decent goblins and feeling good about myself. You are making works of art!
Michael Wayman 2020-03-30 00:31:24
Not sure what it is but it is awesome.
Marcin Brodowski 2020-03-30 01:15:38
Congrats .. Breathtaking ;)
Vera Ermakova 2020-03-30 01:27:23
Michael Inwood thank you :)
Vera Ermakova 2020-03-30 01:27:58
Ernest Sandridge Ill , Thank you!!!
Vera Ermakova 2020-03-30 01:28:16
Chad Weber , Thanks!!
Vera Ermakova 2020-03-30 01:29:03
Josh Tollison , thank you! I am really trying to make the art :)
Vera Ermakova 2020-03-30 01:30:13
Marcin Brodowski , thank you very very much!!
Vera Ermakova 2020-03-30 01:46:43
Gold Walker Sooo... Yes - what you mean exactly? :)
Gold Walker 2020-03-30 02:04:41
Vera Ermakova I mean to create the STL file I can print myself sorry
Vera Ermakova 2020-03-30 02:12:47
Gold Walker Well , that depends of many things :) So you can message me to clarify things.
Gold Walker 2020-03-30 02:16:26
Vera Ermakova I have sent PM
Hutch Heberer 2020-03-30 03:17:15
Why is it whenever I feel like I'm below avg at something. Stuff like this really makes me realize how far into the ground I am at stuff lol this is just beautiful in every possible aspect!
Dave Dewees 2020-03-30 08:23:43
It is awesome, but if it's the first 3d thing they sculpted and they did it with mudbox, the first 3d program they used, how did they know that it has less features than z-brush?
Sol Aris 2020-03-30 10:09:25
Потрясающая работа, завораживающе красиво. Изумительная идея и исполнение. Спасибо!
Gilboy Hill 2020-03-30 12:16:45
Beautiful work (y)
Vera Ermakova 2020-03-30 16:21:10
Dave Dewees , Thanks! I shared this work now, but it doesn't mean this is the last work ;) I've been using ZBrush for half of a year now :)
Vera Ermakova 2020-03-30 16:24:22
Hutch Heberer , Thank you very much!
Vera Ermakova 2020-03-30 16:24:55
Sol Aris Огромное спасибо! :)
原文網址 Konstantin Fedkulov 2020-03-29 06:52:05
Hello, everyone! My new work "witch ride in on a pig" 3D print model
大家好! 我的新作品[女巫騎豬] 3 d列印模型
Oksana Shevchenko 2020-03-29 07:13:47
I love it ? ❤️
Michael Lippert 2020-03-29 07:53:44
stl available?
Paul Pazienzo 2020-03-29 07:57:41
Nick Vandercar 2020-03-29 08:56:37
This is the kind of thing that will get my wife behind 3D printing!
Alex Esteves 2020-03-29 09:47:02
Is the STL available?
Konstantin Fedkulov 2020-03-29 17:07:07
I want to print it myself and check for possible errors. The model will be sold later.
Konstantin Fedkulov 2020-03-29 17:07:26
Gold Walker 2020-03-29 17:50:56
How did you make this ?
Konstantin Fedkulov 2020-03-29 18:26:55
I did this model in ZBrush program
Gold Walker 2020-03-29 18:28:07
Are you for hire ? I’m looking for someone good In Z brush to work with
Konstantin Fedkulov 2020-03-29 22:52:48
Gold Walker I don’t have time for another job, sorry.
Gold Walker 2020-03-29 23:42:32
Konstantin Fedkulov ok thanks
Gold Walker 2020-03-29 23:42:43
Anyone you can recommend?
Konstantin Fedkulov 2020-03-30 00:16:50
Gold Walker I can not advise unfortunately
原文網址 Hoghead Hoffer 2020-03-26 11:20:45
Something I thought I would share with members here. If you want a cheap way to not finger your models while painting and they are tiny, buy some 3d glue dots and stick one on top a testers paint bottle. then stick your model to that. I never paint the bottoms of my bases because sometimes in humidity the paint on the bottom sticks to stuff they are sitting on. After your paint fully drys just twist the model and keep twisting and evetually the glue dot releases leaving no residue on ur model. The leftover gluedot on the testers is then trashed and a new one installed.
我想我會在這裡與各位成員分享的東西. 如果你想要廉價的方法在畫畫時不手指你的模特, 就買一些3 d膠水點, 然後把一個貼在測試人員油漆瓶上. 那就堅持你的模特. 我從來沒有畫過底座的底部, 因為有時在濕度時, 底部的油漆, 他們坐在上面的東西. 你的油漆完全乾燥後, 只要扭曲模型, 繼續扭曲, 並且實際上膠水點釋放, 你的模型上沒有殘留物. 然後, 測試人員上的剩餘的膠水被扔掉, 並安裝了一個新的.
Chris Roberts 2020-03-26 11:24:42
Juliet Starling!
Che Fielding 2020-03-26 11:29:09
Miniature and figure painters have been doing this for years with blu tack, which is reusable and can also be employed as am masking material. Unless you're mounting a lot at once though a GW mini clamp handle is only £5 or there are FDM 3D printable versions.
Josh Berkley 2020-03-26 11:29:13
I like this idea. I use some loctite blue putty and a toothpick sometimes and hold the toothpick in my fingers. Same principle
Josh Berkley 2020-03-26 11:29:37
Che Fielding this is what I do
Hoghead Hoffer 2020-03-26 11:31:01
Che Fielding I have considered buying one. does it hold irregular shapes or just circles
Hoghead Hoffer 2020-03-26 11:31:12
Josh Berkley cool idea as well
Josh Berkley 2020-03-26 11:34:58
I have a rotating lazy Susan type stand that I absolutely love. Works especially well for larger things like terrain and structures but it has clips and holes that I use to stabilize the small figures on the toothpicks and get a 360 angle at them while not dealing with any trembling in the hands (though I believe any mini figure painter or model builder could perform surgery with ease). It's made by Tamiya
Che Fielding 2020-03-26 11:38:42
They hold irregular shapes in the sense of GW oval bases. The clamps are stepped so they won't hold anything that's a crazy shape but as long as the base is on the same level and not too weird yes. If you have an FDM printer though there are a few good files.
Falcon Tom 2020-03-26 11:48:26
Seems really wasteful.
Joe Kirkus 2020-03-26 12:07:12
I use popsicle craft sticks and a bit of superglue. Though that’s just from years of miniature wargaming prior to printing things myself.
Justin Scott Larson 2020-03-26 12:15:10
I just use blu tack
Tim Parks 2020-03-26 12:45:40
Do you paint your minis with Testors?
Hoghead Hoffer 2020-03-26 12:51:53
Falcon Tom opinion
Hoghead Hoffer 2020-03-26 12:52:56
Tim Parks no, I use the bottle to hold them. I have huge hands. I wear a size 18 ring.. tiny things are not held well with my hands
Tim Parks 2020-03-26 13:15:09
Hoghead Hoffer Ya. I use craft paint bottles and do the same thing with sticky tack when I’m painting more then one. I’ve got a GW mini holder for single model painting though, just because they are really comfortable to hold and paint. I was just curious with you because I haven’t heard of someone using testors for painting minis in a long time.
Adam Cartmer 2020-03-26 19:52:02
Finger your models? *touch the resin Yeh, that sounds better
Ricardo Sebastian Ibacache Guerr 2020-03-26 22:56:09
That mini looks overexposed
Hoghead Hoffer 2020-03-26 23:08:03
Ricardo Sebastian Ibacache Guerra not the point of the post either..
Jonathan Alvarado 2020-03-26 23:34:42
nah I think he meant finger. theres some juicy models out there ofcourse
Mark Rhodes 2020-03-27 01:29:29
At first with all the virus craziness goin on i thought this was some weird ass toilet paper that sticks to the finger tip or something.
Austin Cordova 2020-03-27 01:35:46
I've been using the same dirty blue tac similarly for months. Works great.
Hoghead Hoffer 2020-03-27 02:01:53
Austin Cordova that naughty tac has alot of people hooked lol
Falcon Tom 2020-03-27 03:17:55
Hoghead Hoffer Fact, when compared to that blue putty... or anything reusable.
Hoghead Hoffer 2020-03-27 05:12:53
Falcon Tom its an opinion
Falcon Tom 2020-03-27 05:59:50
In the same way 2>1 is an opinion...
Adam Cartmer 2020-03-27 06:35:06
Jonathan Alvarado haha ?
Hoghead Hoffer 2020-03-27 08:53:22
Falcon Tom maybe I don’t like using something covered in germs? like reusable putty. Both of us have opinions. Ours are different.
Shane McAlister 2020-03-28 00:44:30
give me a break, its not wasteful. Hes using it to suit his needs, you use what suits your needs... hes not branding you wasteful... who are you? Greta Thunberg?
原文網址 Dan Gump 2020-03-26 11:16:49
So when hollowing models does the inside of the model need to cure? And if so, how? A buddy asked me to print him a bunch of this little floating demon and damn if they don’t drain the vat. With Amazon being slow to ship me resin (April 23 delivery) I need to be as frugal as I can with it.
For this guy was thinking of hollowing it and putting a drain hold where the peg goes of course but was also thinking of putting a much larger drain hole in the mouth. Thoughts?
所以當空洞模型的內側需要治癒嗎? 如果是, 怎麼辦? 一個朋友讓我給他列印一堆漂浮的惡魔, 如果他們不抽乾增值稅的話. 由於亞馬遜遲緩運送樹脂(四月23日送貨), 我需要盡可能節儉.
因為這個傢伙考慮把它挖洞, 把水管放在那個地方, 當然, 但也考慮在嘴裡放一個更大的排水洞. 想法?
John Chrapkowski 2020-03-26 11:18:28
Two holes are better than one.
Nick Williams 2020-03-26 11:18:56
I use like 3 or 4 holes. In places where no one sees it. Are you using transparent resin?
John Chrapkowski 2020-03-26 11:19:21
Some use a single uv led and put into the hole
Nick Williams 2020-03-26 11:19:44
Nick Williams 2020-03-26 11:19:49
You can see the huge holes on the underside.
Dan Gump 2020-03-26 11:22:53
Nick Williams nope. Gray.
Nick Williams 2020-03-26 11:29:26
Dan ahhh
Jim Nelson 2020-03-26 17:49:04
Yes, uncured resin can hide in hollowed prints and creep out later with not so nice results. I always include at least 2 of the largest holes that will fit in the bottom of the print. After washing, I use a pair of curved tweezers to clean out as many interior supports as possible and a 100 cc syringe of cleaning solution to hose out the interior, paying particular attention to any corners or pockets where uncured resin might lurk. When curing, I try to turn the print at least once to expose the bottom to UV light and allow as much as possible into the interior. Finally, if I'm still uncertain about how much the interior needs UV exposure, I use a small UV light inserted in one or both holes to further cure.
原文網址 Stephen Leslie 2020-03-25 03:13:44
Purchased a model from Cults 3d but seem to have run into a possible issue. https://cults3d.com/en/3d-model/game/cyberpunk-2077-girl-android When I open most of the files in Chitubox the parts are a dark gray rather than the normal blue. When I tell it to slice the file it seems to only show the supports. Attached are couple of pictures to show what I am try to explain. thanks for any and all help.
從邪教3 d購買了一個模型, 但似乎遇到了一個可能的問題. https://cults3d.com/en/3d-model/game/cyberpunk-2077-girl-android 當我開啟chitubox中的大部分檔案時, 部分是深灰色而不是普通的藍色. 當我告訴它切檔案時, 它似乎只顯示支援. 附上幾張照片來展示我試圖解釋的內容. 謝謝大家的幫助.
Steven Howland 2020-03-25 03:15:50
flipped normals, repair the model in 3d builder, netfab, or load it into blender go into edit mode and do recalculate normals.
Oscar Andres 2020-03-25 03:18:15
yo te lo puedo arreglar si quieres, en rhinoceros, oscarand3@gmail.com
Paolo Maurini 2020-03-25 03:21:22
Yep, the normals are the wrong way round. Currently the model is set up with the inside on the outside
Lex Cole 2020-03-25 03:29:17
Stick it into meshlab and flip normals, should sort it in one go
Stephen Leslie 2020-03-25 03:33:24
seemed to fix it. Opened in 3D builder and it automatically fixed it. Looks a lot better now in Chitubox after running the slicer. Thanks Guys. Will try that on the rest of the model pieces.
Paul McKee 2020-03-25 03:37:32
I had an stl with this issue. I'll have to try this tonight. Thanks
Fred Steinmann 2020-03-25 04:19:32
Prusa Slicer also has a repair feature (it uses netfab)
Ernest Sandridge Ill 2020-03-25 06:52:57
is prusa slicer good for even resin printers like the Photon Zero? I downloaded it but it started asking questions about temps and nozzle sizes and such. So I just closed it out.
Petr Grössl 2020-03-25 08:49:49
:-D just use preinstaled prusa SL1 profile repair, pozition, add autosuports and then export whole printing area as STL done... then you can use any photon slicer to get it ready to print as if it was new model
Richard Tyler Jr 2020-03-26 01:31:58
Contact cults 3d and ask the for an updated file
原文網址 Jason Cartwright 2020-03-24 21:12:23
Good morning!
I am looking to hire an artist who would be willing to create STL files for me on commission, from time to time. (I have at least a few in mind already. See below)
I would be willing to also pay extra for exclusive rights to certain models.
The files would basically be that of action figures and/or action figure accessories. (Such as below)
If you, or someone you know might be interested, Please contact me. I would like to get started right away. Thanks!
PS. If you know of a better place to ask this question, please let me know where.
早上好!
我希望聘請一位願意為我製作stl檔案的藝術家. (我至少已經想到了幾個.) 見下面:
我也願意為某些模型的專屬權支付額外費用.
檔案基本上是動作人物和/或動作人物配件. (如下面)
如果你, 或你認識的人可能感興趣, 請聯絡我. 我想馬上開始. 謝謝!
Ps. 如果你知道一個更好的地方可以問這個問題, 請告訴我在哪裡.
Chris Carter 2020-03-24 22:47:49
I can certainly do accessories for you. I've done a whole load of wargaming scale weapons you can check out on my thingiverse profile. https://www.thingiverse.com/MonstrousMakings/designs If you are interested and want to talk more then please message me at my page ( https://www.facebook.com/MonstrousMakings/ )
Adrian Jewell 2020-03-25 04:16:20
PM sent
Anthony Fennell 2020-03-25 12:45:56
Kenner star wars accessories
Julian Kupper 2020-03-25 15:17:12
Think you may find these already online if you look enough
Jason Cartwright 2020-03-26 23:25:01
Surprisingly, none that I've been able to find.
Julian Kupper 2020-03-26 23:51:38
Hummmm a gap in the market! Rare indeed
Jason Cartwright 2020-03-27 05:02:00
Hi, I PMd your page as you said. Still havent heard back though.
Chris Carter 2020-03-27 05:03:11
Jason Cartwright hi Jason, I've had a busy day but I'm going to reply shortly.
原文網址 Damien Greysis 2020-03-24 10:08:04
Hey guys... so I’m trying to maximize my resin use. I’ve been printing straight Siraya Blu which is not cost effective at all. I want to start printing models so I could sell them. What is the best mix of resin that I could use to make something strong and cheap and durable? I currently own the following resins:
Siraya Sculpt Siraya Fast Siraya Tenacious Siraya Blu Assorted Monoprice Resins
Thanks I’m advance!
嘿, 夥計們... 所以我試圖最大限度地使用樹脂. 我一直在列印直的siraya blu, 完全沒有成本效益. 我想開始列印模型, 這樣我就可以賣掉它們. 我可以用甚麼最好的樹脂混合物來製作強壯, 廉價和耐用的東西? 我目前擁有以下樹脂:
西拉亞雕塑 快速快速 Siraya tenacious 藍調排隊 各種單粒樹脂
謝謝, 我進步了!
Shawn McDonald 2020-03-24 10:26:45
50-50 siriya blu and elegoo gray. Or 30 blu 70 gray.
Damien Greysis 2020-03-24 10:33:54
Shawn McDonald gray?
Dave Dewees 2020-03-24 16:32:35
Mix fast and tenacious 30% tenacious 70 fast
原文網址 Robert Clauff 2020-03-23 01:01:49
Ok. I'm having a serious issue here. I printed my initial test print on the photonS however every other print I have attempted I can't get bed adhesion. I've looked at a lot of FAQs and have tried them all. Wtf is the issue. The last print had 10s exposure time, bed exposure at 100s, and several different models. Any suggestions would be appreciated.
好吧. 我這裡有一個嚴重的問題. 我把我的初步測試指紋印在光子上, 但我嘗試過的每一個其他列印, 我無法得到床粘合. 我看了很多常見問題, 都試過了. 他媽的是問題. 最後一張列印有10秒曝光時間, 床曝光時間為100 s, 以及幾個不同的模型. 任何建議都將不勝感激.
Christian Savarda 2020-03-23 01:31:30
Relevel? What kind of resin and what does your supported STL look like?
Josh Tollison 2020-03-23 01:38:06
What all have you tried so far?
Juaco Amado 2020-03-23 01:48:13
Have you changed the FEP lately? It might be not tight enough
Robert Clauff 2020-03-23 01:55:02
When I level I get the paper so that it can't be barely moved. Is that too far perhaps?
Robin MacNeil 2020-03-23 04:00:59
Robert Clauff I used a video that really helped, which said, you should be able to pull it out with a bit of force, but if you try to push it back it bends. So yours sounds a tiny bit too tight.
Robert Clauff 2020-03-23 04:06:07
Robin MacNeil I'll give it another run at #5 and hopefully I get something.
Robin MacNeil 2020-03-23 04:07:59
Robert Clauff Check your resin against this chart to help find the best exposure too: https://www.google.ca/url?sa=t&source=web&rct=j......
Daniel Green 2020-03-23 12:13:24
keep upping your bottom exposure. Mine were sticking until i went to something like 130 or 150
Robert Clauff 2020-03-24 05:30:52
UPDATE: So here are some videos of the fail, cleanup, and re-level. I will post the settings shortly.
Robert Clauff 2020-03-24 05:31:13
Robert Clauff 2020-03-24 05:31:30
Robert Clauff 2020-03-27 02:33:40
UPDATE: Got my problem fixed and a successful print!
原文網址 Lee Rogers 2020-03-20 17:31:11
This maybe a stupid question...can you get dodgy bottles of resin? I have a bottle of grey and black anycubic and a bottle of elegoo clear blue. All recommendations the same 60/8 seconds. This is what I have set out to in the slicer. was using the Anycubic grey and getting great results (pic 1). I then switched to the black Anycubic (same settings) to print a simple base for a model. I've tried upright, 45 degrees, flat, all raised on supports etc but 5 failed prints. Either supports breaking, not sticking to build plate, but mostly resin forming on the FEP which I've had to empty and peel off (pic 2 and 3). I thought it was the screen so swapped to translucent blue, exactly the same settings, could see the screen working through the resin , and it printed a random print perfectly first go (last pics) ?♂️ what's going on with this black resin?
這可能是個愚蠢的問題... 你能得到一瓶樹脂嗎? 我有一瓶灰色和黑色的任何立方體和一瓶elegoo清白藍色. 所有推薦的60/8秒. 這就是我在切片中闡述的. 使用任何立方體灰色, 獲得了很好的結果(圖片1), 然後切換到黑色anycubic (相同的設定)列印一個簡單的模型基礎. 我嘗試了直立, 45度, 平坦, 全都在支撐上, 但5個失敗的指紋. 要麼支援破碎, 而不是堅持構建板塊, 但主要是在我不得不清空和剝離的fep上形成樹脂(圖片2和3). 我以為是螢幕換成半透明藍色, 完全相同的設定, 可以看到螢幕通過樹脂工作, 然後隨機列印了一個完美的列印(最後一張照片) ♂️ 這黑色怎麼了 樹脂?
Darko Miljak 2020-03-20 17:35:30
Revin Leong 2020-03-20 17:43:16
罗西晟 2020-03-20 17:44:11
James Steven Cheeseright 2020-03-20 17:50:18
Lee Rogers 2020-03-20 18:23:28
Lee Rogers 2020-03-20 18:24:05
Lee Rogers 2020-03-20 18:26:10
Lee Rogers 2020-03-20 18:27:06
James Steven Cheeseright 2020-03-20 18:30:07
James Turner 2020-03-20 19:08:07
Lee Rogers 2020-03-20 19:15:31
罗西晟 2020-03-20 19:22:07
James Turner 2020-03-20 19:23:40
罗西晟 2020-03-20 19:27:03
罗西晟 2020-03-20 19:28:46
Richárd Papp 2020-03-20 19:37:25
Richárd Papp 2020-03-20 19:39:30
Richárd Papp 2020-03-20 19:52:10
Fran Ce 2020-03-20 20:24:28
Lee Rogers 2020-03-20 20:28:52
Richárd Papp 2020-03-20 20:36:41
Richárd Papp 2020-03-20 20:37:05
Lee Rogers 2020-03-20 20:38:14
Lee Rogers 2020-03-21 01:00:01
Richárd Papp 2020-03-21 01:01:25
Lee Rogers 2020-03-21 01:08:13
Lee Rogers 2020-03-21 01:08:18
Richárd Papp 2020-03-21 01:28:17
Lee Rogers 2020-03-21 01:32:32
Richárd Papp 2020-03-21 01:33:08
Richárd Papp 2020-03-21 01:33:32
Lee Rogers 2020-03-21 01:36:10
原文網址 Konstantinos Martinos 2020-03-20 01:40:58
Going from 1 (on the build plate) to 2 in 5 minutes!
No cleanup on the models just removed supports. TJ Robichaux is a wizard with manual supports!
5分鐘內從1 (在建築板上)到2!
剛剛移除的模型沒有清理. TJ Robichaux 是一個手動支援的巫師!
Curtis Finnigan 2020-03-20 01:46:24
Konstantinos Martinos 2020-03-20 01:46:50
Pedro Torres 2020-03-20 02:52:55
Konstantinos Martinos 2020-03-20 02:53:54
Pedro Torres 2020-03-20 02:59:27
Rafael Drogo 2020-03-20 02:59:45
Pedro Torres 2020-03-20 03:00:48
Konstantinos Martinos 2020-03-20 03:07:55
Jėan Cardøsø 2020-03-20 03:09:11
Pedro Torres 2020-03-20 03:10:35
Konstantinos Martinos 2020-03-20 03:15:19
Jėan Cardøsø 2020-03-20 03:16:05
Jėan Cardøsø 2020-03-20 03:16:21
Konstantinos Martinos 2020-03-20 03:21:57
Jėan Cardøsø 2020-03-20 03:27:09
Joe Wolf Ritchie 2020-03-20 03:55:55
Sean Isle 2020-03-20 04:07:56
Konstantinos Martinos 2020-03-20 04:08:55
Sean Isle 2020-03-20 04:09:47
Konstantinos Martinos 2020-03-20 04:10:23
Sean Isle 2020-03-20 04:10:35
Sean Isle 2020-03-20 04:10:46
Kevin Lems 2020-03-20 06:15:21
Wesley Snipes McCarter 2020-03-20 11:33:48
Uli Sazma 2020-03-20 14:57:23
Gergely Jávor 2020-03-20 20:56:25
Konstantinos Martinos 2020-03-20 22:50:20
Konstantinos Martinos 2020-03-20 23:25:31
Konstantinos Martinos 2020-03-20 23:25:37
Konstantinos Martinos 2020-03-20 23:25:41
Konstantinos Martinos 2020-03-20 23:25:45
Will Thomas 2020-03-20 23:31:36
Joe Wolf Ritchie 2020-03-20 23:56:22
全不選 發文排行
